Abstract:Local area networks (LANs) are becoming popular in industrial computercontrolled systems increasingly. Broadcast LANs aimed at the interconnection of sensors, actuators and controllers are commonly known as fieldbus networks. Recently, the vendor-specific fieldbus has being substituted by vendor-independent standardized fieldbus, which supports the open system concept and has started to be used commonly. Particular relevance must be given to the IEC 61158 (1999), which encompasses eight widely used fieldbuses: FF HI, ControlNet, PROFIBUS, P-NET, FF HSE, SwiftNet, WorldFIP and Interbu (Xiuju 2000; Xiong 2000) known that time constraints are more stringent as we go down in the automation hierarchy. In this charter, we consider time constraints or deadlines as the maximum allowable time span between a message transfer request and its transmission on the bus. In fact, the total message cycle delay results from multiple factors, such as the access and queuing delays, the transmission time (frame length / transmission rate) and the protocol processing time. As we are dealing with realtime communication across a shared transmission medium, we focus our analysis on the access delay and queuing delay factors. These factors depend on the MAC (Medium Access Control) mechanism used by the fieldbus network. Fieldbus, as infrastructure of communication to support real-time traffic among field devices in factory floor, is one of typical real-time network. According to real-time application, protocol of MAC layer of fieldbus can be divided into event-triggered and time-triggered. The former does not support the real-time application directly and usually uses CSMA (Carrier Sense Multiple Access), like CAN and LON. The latter supports the real-time application directly and often uses token. Further, the time-triggered can be sub-divided into three classes: 1) centralized token in WorldFIP and Foundation Fieldbus; 2) distributed token in PROFIBUS and FDDI; 3) virtual token in P-Net. Recently, several studies on the ability of fieldbus networks to cope with realtime requirements have been presented, such as those by Tindell and Zuberi on

Development Of Opc Ua Based Centralized Server Fieldbus Data High Efficiency Transmit Architecture

Design of a Distributed Fieldbus Remote Monitoring System Based on XML

Interface Technique of Real-time Database Based on OPC and Its Application

A Low-latency and Interoperable Industrial Internet of Things Architecture for Manufacturing Systems.

Design of Integrated Energy System Based on IEC 61499 and OPC UA

Design for Low Latency and High Reliability: OPC-UA Based Production Line for Product Traceability and Customized Service

An Interoperable and Flat Industrial Internet of Things Architecture for Low Latency Data Collection in Manufacturing Systems

Design and FPGA Verification of a Novel Reliable Real-Time Data Transfer System

A Method of Real-Time Data Acquisition and Exchange in Adaptation to Integrated Dispatching Automation System

EPA-based Open Network Control System

Field bus-based embedded SPC system

Applied Fieldbus into Communication Systems in ITS

Leveraging Relational Database for Fast Construction of OPC UA Information Model

A Unified Asset Management Architecture Based on OPC UA

Integration of Sensors, Controllers and Instruments Using a Novel OPC Architecture

Function block oriented architecture for open distributed automation

Application of Fieldbus Technology in Substation Integrated Automation System

AASPMP: Design and Implementation of Production Management Platform Based on AAS

The development of a field controller based on industrial ethernet

Real-time Communication Using Foundation Fieldbus

Developing a field controller based on the EPA industrial ethernet