Abstract:As the most critical part of a hydropower station, reversible pump-turbines (RPTs) are facing the trend of high parameterization (e.g., high head and high rotation speed) with the rapid development of hydropower, which may cause more detrimental cavitation-induced hydrodynamic forces. Considering that cavitation occurs more easily under pump mode than turbine mode for the RPT, the characteristics and generation mechanism of the hydrodynamic radial force induced by cavitation of a RPT model at pump mode are investigated by computational fluid dynamics and experimental methods. Combined with the shear stress transport (SST) turbulence model, the three-dimensional (3D) unsteady Reynolds-averaged Navier-Stokes (URANS) equations are solved to calculate the cavitation flow of the RPT at various cavitation states. The blade loading and the pressure pulsations of the pressure/suction surfaces of the blade are monitored from the inlet to the outlet. Results show that with the development of cavitation, increasing cavitation bubbles covering the blade surfaces lead to the decrease of the blade loading, weaken the regularity of the pressure fluctuation, and increase the amplitude of the pressure pulsation, especially the suction surface. Furthermore, the characteristics of hydrodynamic radial forces under various cavitation states are discussed, and it is found that the values of the hydrodynamic radial forces become larger and the alternating hydrodynamic radial forces are more remarkable with the development of cavitation. Meanwhile, the symmetry of the radial force of the impeller presents a slight change due to the rotor-stator interaction between impeller and guide vanes and the symmetrical structure of the guide vanes. Then, to explore the generation mechanism of the hydrodynamic radial forces, the frequency spectrum of the pressure pulsation and hydrodynamic radial forces are analyzed comparatively. It is found that the hydrodynamic radial forces are affected by the rotor-stator interaction in the initial stage of cavitation, whereas the influence of the pressure distribution of suction surface of the blade increases with the development of cavitation. (c) 2020 American Society of Civil Engineers.

Influence of Leading-Edge Cavitation on Impeller Blade Axial Force in the Pump Mode of Reversible Pump-Turbine

Study on cavitating vortex rope characteristics of reversible pump-turbine under part load turbine condition

Analyses of the spatial and temporal features of the blade pressure‐side cavitation in a pump‐turbine runner in the pump mode

Influence of Blade Leading-Edge Shape on Cavitation in a Centrifugal Pump Impeller

Analysis of axial force and pressure pulsation of centrifugal pump as turbine impeller based on dynamic mode decomposition

Numerical Simulation of Cavitating Flow in Water Hydraulic Axial Piston Pump

Effect Mechanisms of Leading-Edge Tubercle on Blade Cavitation Control in a Waterjet Pump

Cavitation Characteristics and Hydrodynamic Radial Forces of a Reversible Pump–Turbine at Pump Mode

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Influence of impeller-tongue interaction on the unsteady cavitation behavior in a centrifugal pump

Effect of Cavitation Evolution on Power Characteristics of Tidal Current Turbine

Analysis of Flow Characteristics and Cavitation in the Vanes of a Reversible Pump-Turbine in Pump Mode

Numerical Investigation of the Flow Regime and Cavitation in the Vanes of Reversible Pump-Turbine During Pump Mode's Starting Up

Numerical analysis of vortex and cavitation dynamics of an axial-flow pump

Numerical Simulation of the Transient Flow in a Pump-Turbine During the Load Rejection Process With Special Emphasis on the Cavitation Effect

Cavitating Flow Investigation Inside Centrifugal Impellers For A Condensate Pump

Optimization for Cavitation Inception Performance of Pump-Turbine in Pump Mode Based on Genetic Algorithm

Effect of Leading Edge Profile on Cavitation Performance of Mixed Flow Impeller

Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump

Influence of Blade Angle Distribution along Leading Edge on Cavitation Performance of a Centrifugal Pump

Effect of Cavitation on Energy Conversion Characteristics of a Multiphase Pump