Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Fatigue Characterization Study of CFRP under Hygrothermal Environment Based on Continuum Damage Mechanics Model

Damage Behavior and Life Prediction Model of Composite Laminates under Combined High and Low Cycle Fatigue

Experimental Research on Fatigue Behavior of Composites Using Energy Dissipation Methodology

A review on ultra-high cycle fatigue of CFRP

Finite Element Investigation of Fatigue Performance of CFRP-strengthened Beams in Hygrothermal Environments

Modeling the Failure Behavior of Cfrp Laminates Subjected to Combined Thermal and Mechanical Loadings

The fatigue performances of carbon fiber reinforced polymer composites- A review

Fatigue Life Prediction of CFRP-Strengthened RC Beams with Flexural Crack under Hygrothermal Environments.

Resistance Measuring Method on Damage Evolution and Fatigue Life Prediction for CFRP Laminates

Influence of Humidity on Fatigue Performance of CFRP: A Molecular Simulation

Modeling Study on the Mechanical Performance of CFRP/Al Single-Lap Rivet Joints under Hygrothermal Environmental Conditions

On crashworthiness and energy-absorbing mechanisms of hygrothermal-aged CFRP structures subjected to quasi-static loads

Progressive Fatigue Damage Modelling of Fibre-Reinforced Composite Based on Fatigue Master Curves

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

A Progressive Fatigue Damage Model for Composite Structures in Hygrothermal Environments

Experimental and Analytical Study on Residual Stiffness/Strength of CFRP Tendons under Cyclic Loading

Characterization of Impact Fatigue Damage in CFRP Composites Using Nonlinear Acoustic Resonance Method

A Fatigue Damage Model for FRP Composite Laminate Systems Based on Stiffness Reduction

The Bond-Behaviour of CFRP-to-concrete Bonded Joints under Fatigue Loading: A Damage Accumulation Model

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics