Abstract:Composite sandwich beams with a carbon fiber reinforced polymer (CFRP) square honeycomb core were designed and fabricated by using the interlocking method. The dynamic response and failure mechanism of fully-clamped and simply- supported sandwich beams subjected to low-velocity impact were investigated experimentally and the corresponding failure modes of the sandwich beams were obtained. Meanwhile, the damage evolvement process and the failure mechanism were analyzed in detail. Influences of the impact velocity, boundary conditions, the mass distributions of face sheets and the direction of the slots on the failure modes and load-carrying capacity of the sandwich beams were explored. The low-velocity impact experiments of composites specimens with two kinds of boundary conditions were carried out by using the drop-hammer impact test system. Three kinds of initial impact velocity were considered for the simply-supported and the fully- clamped sandwich beams sandwich beams, respectively. In the experiments, the time history curves of the impact load and the midspan deflection of the specimens were recorded by a load cell and a laser displacement sensor. Meanwhile, the deformation processes of the sandwich beams were captured by a high-speed camera. The experimental results show that the directions for the slots of the long ribs have significant influence on the failure modes of the sandwich beams. The sandwich core with the upward slots at the midspan has compression deformation whilst the cracking failure along the direction of the downward slots at the midspan is observed due to the tension, which results in the face-sheet debonding and rib fracture successively. It is found that for the same mass, the design of the thicker upper face sheet can enhance the impact resistance of the sandwich beams. The peak load and load-carrying capacity of the sandwich beams increase with increasing the impact velocity. The fully-clamped boundary conditions make the sandwich beams exhibit hardening post-failure behaviors obviously. After the initial failure at the midspan, the fully-clamped ends of the cores and the face-sheets of the sandwich beams experience the fracture failure.

A Comparison of Structural Collapse of Fully Clamped and Simply Supported Hybrid Composite Sandwich Beams with Geometrically Asymmetric Face Sheets

The Load-Carrying Capacity of Sandwich Beams in Different Collapse Mechanisms

Deformation and Failure of Hybrid Composite Sandwich Beams with a Metal Foam Core under Quasi-Static Load and Low-Velocity Impact

The influence of asymmetric faces on low-velocity impact failure of CFRP/aluminum foam composite sandwich beams

The Initial Plastic Failure of Fully Clamped Geometrical Asymmetric Metal Foam Core Sandwich Beams

Mechanical Properties and Damage Failure of Carbon Fiber Reinforced Polymer Composite Sandwich Structure with Square Honeycomb Core Using the Interlocking Method

Low-velocity impact response and failure mechanism of CFRP sandwich beams with a square honeycomb core fabricated by the interlocking method

The Failure Behavior of Geometrically Asymmetric Metal Foam Core Sandwich Beams under Three-Point Bending

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Responses of Damage and Energy of Sandwich and Multilayer Beams Composed of Metallic Face Sheets and Aluminum Foam Core under Bending Loading

The Plastic Collapse of Sandwich Beams with a Metallic Foam Core

Mechanical Behavior and Failure of Composite Pyramidal Truss Core Sandwich Columns

Experimental study on flexural performance of tooth-plate-glass-fiber hybrid sandwich beams

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Failure Behavior of a Sandwich Beam with GLARE Face-Sheets and Aluminum Foam Core under Three-Point Bending

Shear and Bending Performance of Carbon Fiber Composite Sandwich Panels with Pyramidal Truss Cores

Bending Response of Carbon Fiber Composite Sandwich Beams with Three Dimensional Honeycomb Cores

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Structural Response of All-Composite Pyramidal Truss Core Sandwich Columns in End Compression

Multi-failure Analyses of Carbon-fiber-reinforced Miura-ori Core Sandwich Panels Subjected to In-plane Compressive Load