Abstract:No AccessEngineering NoteFlexible Multibody Model and the Dynamics of the Deployment of Mesh AntennasYun Peng, Zhihua Zhao, Ming Zhou, Jiawei He, Jungang Yang and Yong XiaoYun PengTsinghua University, 100084 Beijing, People's Republic of China, Zhihua ZhaoTsinghua University, 100084 Beijing, People's Republic of China, Ming ZhouTsinghua University, 100084 Beijing, People's Republic of China, Jiawei HeTsinghua University, 100084 Beijing, People's Republic of China, Jungang YangXi'an Space Radio Academic Institution, 710071 Xi'an, People's Republic of China and Yong XiaoXi'an Space Radio Academic Institution, 710071 Xi'an, People's Republic of ChinaPublished Online:3 Mar 2017https://doi.org/10.2514/1.G000361SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Hedgepeth J. M., "Accuracy Potentials for Large Space Antenna Reflectors with Passive Structure," Journal of Spacecraft and Rockets, Vol. 19, No. 3, May 1982, pp. 211–217. doi:https://doi.org/10.2514/3.62239 JSCRAG 0022-4650 LinkGoogle Scholar[2] Meguro A., "An Ultra-Light Large Antenna Reflector for Communication Satellites," Proceedings of the 54th International Astronautical Congress of the International Astronautical Federation, the International Academy of Astronautics, and the International Inst. of Space Law, International Astronautical Congress Paper IAC-03-I.1.06, Bremen, Germany, Sept. 2003. doi:https://doi.org/10.2514/6.IAC-03-I.1.06 LinkGoogle Scholar[3] Tibert G., "Deployable Tensegrity Structures for Space Applications," Ph.D. Dissertation, Royal Inst. of Technology, Stockholm, 2002. Google Scholar[4] Thomson M. W., Marks G. W. and Hedgepeth J. M., "Light-Weight Reflector for Concentrating Radiation," U.S. Patent 5,680,145, Oct. 1997. Google Scholar[5] Thomson M. W., "The Astromesh Deployable Reflector," Antennas and Propagation Society International Symposium, Vol. 3, IEEE Publ., Piscataway, NJ, 1999, pp. 1516–1519. Google Scholar[6] Mobrem M., Kuehn S., Spier C. and Slimko E., "Design and Performance of Astromesh Reflector Onboard Soil Moisture Active Passive Spacecraft," Proceedings of the Aerospace Conference, IEEE Publ., Piscataway, NJ, 2012, pp. 1–10. Google Scholar[7] Li T., "Deployment Analysis and Control of Deployable Space Antenna," Aerospace Science and Technology, Vol. 18, No. 1, April 2012, pp. 42–47. doi:https://doi.org/10.1016/j.ast.2011.04.001 CrossrefGoogle Scholar[8] Lin J. and Fang H. F., "Concept Study of a 35-m Spherical Reflector System for NEXRAD in Space Application," 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, NewPort, Rhode Island, May 2006. Google Scholar[9] Smith T., Lee B., Semler D. and Chae D., "A Large S-Band Antenna for a Mobile Satellite," Space 2004 Conference and Exhibit, AIAA Paper 2004-6120, Sept. 2004. doi:https://doi.org/10.2514/6.2004-6120 LinkGoogle Scholar[10] Géradin M. and Cardona A., Flexible Multibody Dynamics: A Finite Element Approach, Wiley, New York, 2001, Chaps. 5–7. Google Scholar[11] Bauchau O. A., Flexible Multibody Dynamics, Vol. 176, Springer, The Netherlands, 2010, Chaps. 10, 16. Google Scholar[12] Yu L., Zhao Z., Tang J. and Ren G., "Integration of Absolute Nodal Elements into Multibody System," Nonlinear Dynamics, Vol. 62, No. 4, Dec. 2010, pp. 931–943. doi:https://doi.org/10.1007/s11071-010-9775-6 NODYES 0924-090X CrossrefGoogle Scholar[13] Hong D. and Ren G., "A Modeling of Sliding Joint on One-Dimensional Flexible Medium," Multibody System Dynamics, Vol. 26, No. 1, Jan. 2011, pp. 91–106. doi:https://doi.org/10.1007/s11044-010-9242-7 CrossrefGoogle Scholar[14] Schiehlen W., "Multibody System Dynamics: Roots and Perspectives," Multibody System Dynamics, Vol. 1, No. 2, 1997, pp. 149–188. doi:https://doi.org/10.1023/A:1009745432698 CrossrefGoogle Scholar[15] Yang C. and Ren G., "Dynamic Simulation of Multifold Deployable Rings," AIAA Journal, Vol. 52, No. 7, July 2014, pp. 1555–1559. doi:https://doi.org/10.2514/1.J052187 AIAJAH 0001-1452 LinkGoogle Scholar[16] Simo J. C. and Vu-Quoc L., "A Three-Dimensional Finite-Strain Rod Model. Part 2: Computational Aspects," Computer Methods in Applied Mechanics and Engineering, Vol. 58, No. 1, 1986, pp. 79–116. doi:https://doi.org/10.1016/0045-7825(86)90079-4 CMMECC 0045-7825 CrossrefGoogle Scholar[17] Shabana A. A., Dynamics of Multibody Systems, 3rd ed., Cambridge Univ. Press, New York, 2005, Chap. 3. CrossrefGoogle Scholar[18] Bauchau O. A., Epple A. and Bottasso C. L., "Scaling of Constraints and Augmented Lagrangian Formulations in Multibody Dynamics Simulations," Journal of Computational and Nonlinear Dynamics, Vol. 4, No. 2, 2009, pp. 7–15. doi:https://doi.org/10.1115/1.3079826 JCNDDM 1555-1415 CrossrefGoogle Scholar[19] Hairer E. and Wanner G., Solving Ordinary Differential Equations II: Stiff and Differential-Algebraic Problems, 2nd ed., Springer, Berlin, 2010, Chap. 7. Google Scholar[20] Goldstein H., Poole C. P. and Safko J. L., Classical Mechanics, 3rd ed., Pearson Education International, Pearson Addison-Wesley, Upper Saddle River, NJ, 2002, pp. 16–21. Google Scholar[21] Bathe K.-J., Finite Element Procedures, Prentice–Hall, Englewood Cliffs, NJ, 1996, pp. 796–797. Google Scholar[22] Beer F. P., Johnston E. R. and Mazurek D. F., Vector Mechanics for Engineers. Statics, 10th ed., McGraw–Hill, New York, 2013, pp. 449–451. Google Scholar[23] Danielson J. D., "Mobile Boom Cranes and Advanced Input Shaping Control," Ph.D. Dissertation, Georgia Inst. of Technology, Atlanta, GA, 2008. Google Scholar[24] Sabatini M., Gasbarri P. and Palmerini G. B., "Elastic Issues and Vibration Reduction in a Tethered Deorbiting Mission," Advances in Space Research, Vol. 57, No. 9, May 2016, pp. 1951–1964. doi:https://doi.org/10.1016/j.asr.2016.02.010 ASRSDW 0273-1177 CrossrefGoogle Scholar[25] Zhao Z. and Ren G., "A Quaternion-Based Formulation of Euler–Bernoulli Beam Without Singularity," Nonlinear Dynamics, Vol. 67, No. 3, Feb. 2012, pp. 1825–1835. doi:https://doi.org/10.1007/s11071-011-0109-0 NODYES 0924-090X CrossrefGoogle Scholar[26] Wu J., Zhao Z. and Ren G., "Multibody Analysis of the Force in Deploying Booms," Journal of Guidance, Control, and Dynamics, Vol. 36, No. 6, Nov. 2013, pp. 1881–1886. doi:https://doi.org/10.2514/1.60296 JGCODS 0731-5090 LinkGoogle Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byThe Pretension Design of Cable Mesh considering the Large Deformation of Ring TrussInternational Journal of Aerospace Engineering, Vol. 2023Driving cable design for a cylindrical deployable mechanism based on depth first searchActa Astronautica, Vol. 202Investigation of compact packing strategy for large rigid-panel deployable antennasMechanism and Machine Theory, Vol. 176Recent Advances in Space-Deployable Structures in ChinaEngineering, Vol. 17Deployment Strategy and Dynamic Analysis of Large Ring Truss AntennaInternational Journal of Aerospace Engineering, Vol. 2022Deployment modeling for soft cable networks from slack to tensionInternational Journal of Mechanical Sciences, Vol. 221Configurational forces and geometrically exact formulation of sliding beams in non-material domainsComputer Methods in Applied Mechanics and Engineering, Vol. 395Numerical integration algorithms and constraint formulations for an ALE-ANCF cable elementMechanism and Machine Theory, Vol. 170Rod-removal technique for flexible-rods in the framework of semi-recursive multibody formulationMechanism and Machine Theory, Vol. 169Deployable Structures: Structural Design and Static/Dynamic Analysis27 October 2021 | Journal of Elasticity, Vol. 146, No. 2Nonlinear dynamic analysis of arresting gears using 2D non-material variable-domain corotational elementsMechanism and Machine Theory, Vol. 163Embodiment of intra-abdominal pressure in a flexible multibody model of the trunk and the spinal unloading effects during static lifting tasks29 May 2021 | Biomechanics and Modeling in Mechanobiology, Vol. 20, No. 4Sensitivity analysis of deployable flexible space structures with a large number of design parameters2 August 2021 | Nonlinear Dynamics, Vol. 105, No. 3Iterative refinement algorithm for efficient velocities and accelerations solutions in closed-loop multibody dynamicsMechanical Systems and Signal Processing, Vol. 152Dynamics Modelling and Simulation for Deployment Characteristics of Mesh Reflector Antennas6 November 2020 | Applied Sciences, Vol. 10, No. 21An efficient multibody dynamic model of arresting cable systems based on ALE formulationMechanism and Machine Theory, Vol. 151Modeling muscle wrapping and mass flow using a mass-variable multibody formulation20 March 2020 | Multibody System Dynamics, Vol. 49, No. 3A mass-flowing muscle model with shape restrictive soft tissues: correlation with sonoelastography18 December 2019 | Biomechanics and Modeling in Mechanobiology, Vol. 19, No. 3Trade study to select best alternative for cable and pulley simulation for cranes on offshore vessels2 August 2019 | Systems Engineering, Vol. 23, No. 2Equivalence of Lagrange's equations for non-material volume and the principle of virtual work in ALE formulation17 December 2019 | Acta Mechanica, Vol. 231, No. 3Gravity compensation system of mesh antennas for in-orbit prediction of deployment dynamicsActa Astronautica, Vol. 167An efficient multibody dynamic model of three-dimensional meshing contacts in helical gear-shaft system and its solutionMechanism and Machine Theory, Vol. 142Thermal-structural dynamic analysis of a satellite antenna with the cable-network and hoop-truss supports20 August 2019 | Journal of Thermal Stresses, Vol. 42, No. 11Efficient and high-fidelity steering ability prediction of a slender drilling assembly10 August 2019 | Acta Mechanica, Vol. 230, No. 11Dynamic Analysis of the Deployment for Mesh Reflector Antennas Driven With Variable Length Cables23 September 2019 | Journal of Computational and Nonlinear Dynamics, Vol. 14, No. 11Harnessing noncircular gears to achieve nonlinear passive springsMechanism and Machine Theory, Vol. 140A Multibody Dynamics Approach to Limit Cycle Walking10 April 2019 | Robotica, Vol. 37, No. 10From multiscale modeling to design of synchronization mechanisms in mesh antennasActa Astronautica, Vol. 159Improved vibration attenuation performance of large hoop truss structures via a hybrid control algorithm3 May 2019 | Smart Materials and Structures, Vol. 28, No. 6Torsional negative stiffness mechanism by thin stripsTheoretical and Applied Mechanics Letters, Vol. 9, No. 3Modeling and analysis of sliding joints with clearances in flexible multibody systems4 August 2018 | Nonlinear Dynamics, Vol. 94, No. 4Passive nonlinear actuators for deploying mesh antennasActa Astronautica, Vol. 152Simultaneous topology and size optimization of a 3D variable-length structure described by the ALE–ANCFMechanism and Machine Theory, Vol. 129An Arbitrary Lagrangian–Eulerian formulation of a geometrically exact Timoshenko beam running through a tube3 May 2018 | Acta Mechanica, Vol. 229, No. 8A model order reduction method for the simulation of gear contacts based on Arbitrary Lagrangian Eulerian formulationComputer Methods in Applied Mechanics and Engineering, Vol. 338Buckling of a slender rod confined in a circular tube: Theory, simulation, and experimentInternational Journal of Mechanical Sciences, Vol. 140 What's Popular Volume 40, Number 6June 2017Supplemental Materials CrossmarkInformationCopyright © 2016 by the authors. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the ISSN 0731-5090 (print) or 1533-3884 (online) to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsAntennasCommunication SystemCommunication Technology and EquipmentComputational Fluid DynamicsComputing, Information, and CommunicationFinite Element MethodFlexible and Active StructuresFluid DynamicsMultibody SimulationNumerical AnalysisNumerical InterpolationStructural AnalysisStructural EngineeringStructural Modeling and SimulationStructures, Design and TestTrusses KeywordsAntenna DesignTrussesBending MomentArbitrary Lagrangian EulerianLongeronsMass FlowMultibody SimulationLagrange MultipliersLinear InterpolationFriction CoefficientAcknowledgmentsThe authors would like to thank Gexue Ren for several helpful discussions as well as the anonymous reviewers and the Associate Editor Jurek Sasiadek for their constructive and detailed comments on improving this Note. This research was conducted with financial support from the National Natural Science Foundation of China (11302114) and the Major State Basic Research Development Program (2012CB821203); their support is highly appreciated.PDF Received18 December 2015Accepted10 November 2016Published online3 March 2017

Abstract:No AccessTechnical NoteVibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich PanelsXiaoyu Zhang, Hao Zhou, Wenhua Shi, Fuming Zeng, Huizhong Zeng and Geng ChenXiaoyu ZhangBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China*Engineer, Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST.Search for more papers by this author, Hao ZhouBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China†Ph.D., Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST; (Corresponding Author).Search for more papers by this author, Wenhua ShiBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China‡Researcher, Market Research Department, CAST.Search for more papers by this author, Fuming ZengBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China§Researcher, Department of Mechanical System, CAST.Search for more papers by this author, Huizhong ZengBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China*Engineer, Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST.Search for more papers by this author and Geng ChenRWTH Aachen University, 52068 Aachen, GermanyDr.-Ing., Chair and Institute for Materials Applications in Mechanical Engineering.Search for more papers by this authorPublished Online:29 Jun 2018https://doi.org/10.2514/1.J057241SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Gibson L. J. and Ashby M. F., Cellular Solids: Structure and Properties, Cambridge Univ. Press, Cambridge, 1999, Chaps. 1–3, 9. doi:https://doi.org/10.1017/CBO9781139878326 Google Scholar[2] Schaedler T. A., Jacobsen A. J., Torrents A., Sorensen A. E., Lian J., Greer J. R., Valdevit L. and Carter W. B., “Ultralight Metallic Microlattices,” Science, Vol. 334, No. 6058, 2011, pp. 962–965. doi:https://doi.org/10.1126/science.1211649 SCIEAS 0036-8075 CrossrefGoogle Scholar[3] Yuan W., Song H. W., Wang X. and Huang C. G., “Experimental Investigation on Thermal Buckling Behavior of Truss-Core Sandwich Panels,” AIAA Journal, Vol. 53, No. 4, 2015, pp. 948–957. doi:https://doi.org/10.2514/1.J053246 AIAJAH 0001-1452 LinkGoogle Scholar[4] Sing S. L., Yeong W. Y., Wiria F. E. and Tay B. Y., “Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method,” Experimental Mechanics, Vol. 56, No. 5, 2016, pp. 735–748. doi:https://doi.org/10.1007/s11340-015-0117-y EXMCAZ 0014-4851 CrossrefGoogle Scholar[5] Rashed M. G., Ashraf M., Mines R. A. W. and Hazell P. J., “Metallic Microlattice Materials: A Current State of the Art on Manufacturing, Mechanical Properties and Applications,” Materials and Design, Vol. 95, No. 5, 2016, pp. 518–533. doi:https://doi.org/10.1016/j.matdes.2016.01.146 MADSD2 0264-1275 CrossrefGoogle Scholar[6] Caulfield J., Karlsson A. M. and Sypeck D. J., “Crushing of a Textile Core Sandwich Panel,” AIAA Journal, Vol. 44, No. 6, 2006, pp. 1339–1344. doi:https://doi.org/10.2514/1.17156 AIAJAH 0001-1452 LinkGoogle Scholar[7] Deshpande V. S., Ashby M. F. and Fleck N. A., “Foam Topology: Bending Versus Stretching Dominated Architectures,” Acta Materialia, Vol. 49, No. 6, 2001, pp. 1035–1040. doi:https://doi.org/10.1016/S1359-6454(00)00379-7 ACMAFD 1359-6454 CrossrefGoogle Scholar[8] Wadley H. N. G., Fleck N. A. and Evans A. G., “Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures,” Composites Science and Technology, Vol. 63, No. 16, 2003, pp. 2331–2343. doi:https://doi.org/10.1016/S0266-3538(03)00266-5 CSTCEH 0266-3538 CrossrefGoogle Scholar[9] Radford D. D., Fleck N. A. and Deshpande V. S., “The Response of Clamped Sandwich Beams Subjected to Shock Loading,” International Journal of Impact Engineering, Vol. 32, No. 6, 2006, pp. 968–987. doi:https://doi.org/10.1016/j.ijimpeng.2004.08.007 IJIED4 0734-743X CrossrefGoogle Scholar[10] Queheillalt D. T. and Wadley H. N. G., “Cellular Metal Lattices with Hollow Trusses,” Acta Materialia, Vol. 53, No. 2, 2005, pp. 303–313. doi:https://doi.org/10.1016/j.actamat.2004.09.024 ACMAFD 1359-6454 CrossrefGoogle Scholar[11] Tsopanos S., Mines R. A. W., McKown S., Shen Y., Cantwell W. J., Brooks W. and et al., “The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures,” Journal of Manufacturing Science and Engineering, Vol. 132, No. 4, 2010, Paper 041011. doi:https://doi.org/10.1115/1.4001743 CrossrefGoogle Scholar[12] Gibson I., Rosen D. W. and Stucker B., Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, New York, 2009, Chaps. 2, 5. doi:https://doi.org/10.1007/978-1-4419-1120-9 Google Scholar[13] Yan C., Hao L., Hussein A., Young P. and Huang J., “Microstructure and Mechanical Properties of Aluminium Alloy Cellular Lattice Structures Manufactured by Directmetal Laser Sintering,” Materials Science and Engineering: A, Vol. 628, 2015, pp. 238–246. doi:https://doi.org/10.1016/j.msea.2015.01.063 CrossrefGoogle Scholar[14] Fan F. L., Fang D. N. and Jing F. N., “Yield Surfaces and Micro-Failure Mechanism of Block Lattice Truss Materials,” Materials and Design, Vol. 29, No. 10, 2008, pp. 2038–2042. doi:https://doi.org/10.1016/j.matdes.2008.04.013 MADSD2 0264-1275 CrossrefGoogle Scholar[15] Tang M. and Pistorius P. C., “Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting,” JOM: The Journal of the Minerals, Metals & Materials Society, Vol. 69, No. 3, 2017, pp. 1–7. doi:https://doi.org/10.1007/s11837-016-2230-5 CrossrefGoogle Scholar[16] Pearce M., Lund J., Lundin M. and Lundquist J., “Random Vibration Tests of the Anticoincidence System of the PAMELA Satellite Experiment,” Nuclear Instruments and Methods in Physics Research A, Vol. 488, No. 3, 2002, pp. 536–542. doi:https://doi.org/10.1016/S0168-9002(02)00562-4 CrossrefGoogle Scholar[17] Krishna Murty A. V. and Viswa Murty G., “Design Modifications in Vibration Problems,” Journal of spacecraft and Rockets, Vol. 5, No. 7, 1968, pp. 870–872. doi:https://doi.org/10.2514/3.29378 JSCRAG 0022-4650 LinkGoogle Scholar[18] Nagaraj V. T., “Changes in the Vibration Characteristics due to Changes in the Structure,” Journal of Spacecraft and Rockets, Vol. 7, No. 12, 1970, pp. 1499–1501. doi:https://doi.org/10.2514/3.30209 JSCRAG 0022-4650 LinkGoogle Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byAdditive Manufacturing for Lightweighting Satellite Platform22 February 2023 | Applied Sciences, Vol. 13, No. 5Softening-spring nonlinearity in large amplitude vibration of unsymmetric double-layer lattice truss core sandwich beamsThin-Walled Structures, Vol. 182Research on the Lightweight Design of an Aircraft Support Based on Lattice-Filled Structures2 December 2022 | Mathematics, Vol. 10, No. 23Resonance frequency prediction approach of lattice structure fabricated by selective laser melting30 May 2022 | Advances in Astronautics Science and Technology, Vol. 5, No. 4Research on Pressurized Structure Based on Lattice Truss Sandwich24 July 2022 | Advances in Astronautics Science and Technology, Vol. 5, No. 42D Elasticity solution for sandwich panels with functionally graded lattice coresComposite Structures, Vol. 300Additively Manufactured Lattice Truss Sandwich Cylinder and Free Vibration Behaviors20 May 2022 | International Journal of Structural Stability and Dynamics, Vol. 22, No. 13Shock-Induced Vibration of Composite Truss Core Sandwich Plates with Distributed Nonlinear Absorbers by Optimal Locations6 August 2022 | Actuators, Vol. 11, No. 8Structural modeling of sandwich panels with additively manufactured strut-based lattice coresAdditive Manufacturing, Vol. 55Vibration of a Satellite Structure with Composite Lattice Truss Core Sandwich PanelsGe Qi, Li Ma , Mayara Bortolotti Rossini and Kai-Uwe Schröder1 March 2022 | AIAA Journal, Vol. 60, No. 6Deep learning-based X-ray computed tomography image reconstruction and prediction of compression behavior of 3D printed lattice structuresAdditive Manufacturing, Vol. 54Thermal and Structural Performance of a Small Satellite with Networked Oscillating Heat PipesNaoko Iwata , Masanori Saitoh, Keiichi Yanagase, Yasuhiro Iso, Yukio Inoue, Hiroyuki Ogawa and Yoshiro Miyazaki20 February 2022 | Journal of Spacecraft and Rockets, Vol. 59, No. 3A multiscale topological design method of geometrically asymmetric porous sandwich structures for minimizing dynamic complianceMaterials & Design, Vol. 214Fabrication of triangular corrugated structure using 3D printed continuous carbon fiber-reinforced thermosetting epoxy compositesPolymer Testing, Vol. 106Investigation on the modelling approach for variable-density lattice structures fabricated using selective laser meltingMaterials & Design, Vol. 212Metal Additive Manufacturing for Satellites and Rockets17 December 2021 | Applied Sciences, Vol. 11, No. 24Nonlinear vibratory properties of additive manufactured continuous carbon fiber reinforced polymer composites4 August 2021 | The International Journal of Advanced Manufacturing Technology, Vol. 117, No. 3-4On the attenuation of vibration using a finite periodic array of rods comprised of either symmetric or asymmetric cellsJournal of Sound and Vibration, Vol. 511Vibration characteristics of simply supported pyramidal lattice sandwich plates on elastic foundation: Theory and experimentsThin-Walled Structures, Vol. 166A review of the recent trends on core structures and impact response of sandwich panels1 February 2021 | Journal of Composite Materials, Vol. 55, No. 18Equivalent continuum method of plane-stress dominated plate-lattice materialsThin-Walled Structures, Vol. 164Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle componentsChinese Journal of Aeronautics, Vol. 34, No. 5Effective strut-based design approach of multi-shaped lattices using equivalent material properties24 March 2021 | Journal of Mechanical Science and Technology, Vol. 35, No. 4Design of self-supporting lattices for additive manufacturingJournal of the Mechanics and Physics of Solids, Vol. 148Multi-failure analyses of additively manufactured lattice truss sandwich cylindersComposites Part B: Engineering, Vol. 207Study of sandwich panel application on side hull of crude oil tankerJournal of Applied Engineering Science, Vol. 19, No. 4Analysis and active control of nonlinear vibration of composite lattice sandwich plates3 November 2020 | Nonlinear Dynamics, Vol. 102, No. 4Characteristics of an improved boundary insert for sandwich panels with lattice truss coresAerospace Science and Technology, Vol. 107Vibration-based damage identification for ship sandwich plate using finite element method14 August 2020 | Open Engineering, Vol. 10, No. 1Architecture design of periodic truss-lattice cells for additive manufacturingAdditive Manufacturing, Vol. 34Vibration characteristics of novel multilayer sandwich beams: Modelling, analysis and experimental validationsMechanical Systems and Signal Processing, Vol. 142Dynamic modeling and vibration control of a coupled rigid-flexible high-order structural system: A comparative studyAerospace Science and Technology, Vol. 102Topological design of sandwich structures with graded cellular cores by multiscale optimizationComputer Methods in Applied Mechanics and Engineering, Vol. 361Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing4 February 2020 | Structural and Multidisciplinary Optimization, Vol. 61, No. 3Nonlinear Flutter Suppression and Thermal Buckling Elimination for Composite Lattice Sandwich PanelsYuyang Chai, Fengming Li and Zhiguang Song16 July 2019 | AIAA Journal, Vol. 57, No. 11Flatwise compression property of hierarchical thermoplastic composite square latticeComposite Structures, Vol. 210 What's Popular Volume 56, Number 10October 2018 CrossmarkInformationCopyright © 2018 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the ISSN 0001-1452 (print) or 1533-385X (online) to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsComputational Fluid DynamicsFinite Element MethodFluid DynamicsLaunch VehiclesMaterials TestingMechanical TestingMechanical and Structural VibrationsNumerical AnalysisSatellitesSpace Launch SystemsSpace SystemsSpace Systems and VehiclesSpacecraftsStructural AnalysisStructural Design and DevelopmentStructural EngineeringStructures, Design and Test KeywordsSatellitesResonant FrequenciesDirect Metal Laser MeltingTensile StrengthFEMRocket LaunchPower Spectral DensityAcceleration SensorsStructural FailureNumerical AnalysisAcknowledgmentsThis project was financially supported by the Young Elite Scientists Sponsorship Program from China Association for Science and Technology. The authors acknowledge the support from Beijing Institute of Spacecraft System Engineering and Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications.PDF Received21 March 2018Accepted9 May 2018Published online29 June 2018

Geometric Method of Form Finding for Mesh Reflectors

Structure design and mechanical measurement of inflatable antenna

Flexible Multibody Model and the Dynamics of the Deployment of Mesh Antennas

Kinematic analysis of deployable toroidal spatial truss structures for large mesh antenna

Mesh Generation and Preventing Winding of Large Net-Shape Deployable Antennas for Satellite

Reflector Surface Precision Experiment of Deployable Truss Antenna

Reflector design and precision measurement of inflatable antenna

Error Computation Method of Deployable Truss Antenna

Structural optimization and model fabrication of a double-ring deployable antenna truss

Structural Design and Static Analysis of a Double-Ring Deployable Truss for Mesh Antennas

Structure–electronic synthesis design of deployable truss antenna

A shape design method of large space deployable paraboloid antenna

Design and Fabrication of New Type Reflect Array Antenna

Design and Fabrication of A Folding-And-Rolling Reflectarray Antenna

Novel Approach to Intersatellite Time-Difference Measurements for Microsatellites

Optimal Design and Analysis of Deployable Antenna Truss Structure Based on Dynamic Characteristics Restraints

Development Of A Novel Double-Ring Deployable Mesh Antenna

Parametric Model Method and Deployment Simulation of Inflatable Antenna Structures

Deployment Control and Test of Deployable Tetrahedral Truss Antenna

Vibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich Panels

Thermal design optimization method of mesh reflector antennas considering the interaction between cable net and flexible truss