Abstract:Accuracy detection for five-axis numerical control (NC) machine tools that can truly reflect their practical machining precision is of crucial importance. Standard test pieces are commonly employed for this purpose. However, poor accuracy detection performance is obtained when the test pieces used here are applied to five-axis NC machine tools. This paper introduces a new S-shaped test piece that is exclusively designed for the precision detection of five-axis NC machine tools. The S-shaped test piece integrates numerous characteristics associated with aviation parts and has been widely adopted by machine tool makers. This article presents a numerical model of the latest S-shaped test piece and shows that its side surfaces represent typical undevelopable ruled surfaces. The curvature changes along the ruled lines inevitably produce a theoretical error. Thus, machining methods seek to reduce the theoretical error as much as possible. Based on basic summaries of five existing positioning algorithms, a novel algorithm is proposed to position the tool head using three points, wherein two are tangential to the top and bottom boundary curves, respectively, and the third is tangential to the midpoint of the ruled line. The proposed positioning algorithm together with five existing positioning algorithms is applied to the S-shaped test piece, and a numerical error performance analysis is conducted. The results indicate that the machined surface reduces the theoretical error by at least 96% compared to all the existing numerical positioning algorithms except for Redonnet's algorithm. Compared with Redonnet's algorithm, the accuracy of the proposed algorithm is equivalent, although the proposed algorithm reduces the calculation time by 62.7%, and is not sensitive to the initial values. Hence, the computational process demonstrates that the proposed method is efficient, robust, and universal. Finally, simulation results were confirmed through an actual machining experiment.

NC Machining Verification Algorithm Based on the STL Model

Improving the Efficiency of Solid-Based NC Simulation by Using Spatial Decomposition Methods

Virtual Machining Accuracy Verification by Triangular Patch Comparison

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

The Study of Five-Axis NC Simulation by Stencil Buffer Algorithm

NC Codes Optimization for Geometric Error Compensation of Five-Axis Machine Tools with One Novel Mathematical Model

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

The Study of Five-Axis Graphic Simulation by Swept Volume Algorithm

STEP-NC feature-oriented high-efficient CNC machining simulation

A New Algorithm for the Identification of CNC Geometric Errors

An Improved Positioning Method for Flank Milling of S-shaped Test Piece

An Algorithm for Geometric Modeling and Intersection in Nc Milling Simulation Based on Triangular Mesh Model

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Volumetric Error Compensation of Machine Tool Using Laser Tracer and Machining Verification

On Estimation of Scallop Height from CNC Part Programs

Simulation Verification of Parts Processing Based on Virtual Numerical Control Machine

Automated Tool Path Generation for End-Milling Operation Using CAD Model in STL Format

A New Tool-Path Generation Algorithm For Sculptured Surface Using Taper-Cutter

An automated approach for machining allowance evaluation of casting parts

A novel comprehensive thermal error modeling method by using the workpiece inspection data from production line for CNC machine tool

NC Milling Simulation and Error Control of Aerial Thin Wall Workpieces