Abstract:To realize real-time convergence monitoring of operating shield tunnels,the layout scheme of wireless tilt sensors was optimized in this study.Under the interaction of tunnel depth,joint bending stiffness ratio,ground resistance ratio,lateral pressure coefficient,and ground overloading,considering the effect of segment and joint deformation,a new method for calculating the convergence of shield tunnel based on tilt sensors was proposed. Error back analysis was used to obtain the optimal installation position.A three-dimensional refined numerical model of single-ring shield tunnel was built to verify the analytical solution.Twenty-five groups of optimal layouts were ob-tained using orthogonal test.Moreover,several current convergence algorithms were presented and discussed. Field data for 168 days were analyzed using the square law,and the different sums of squares of the shield tunnel conver-gence sensed by different methods and the result monitored by laser range sensors were compared.The results show that the optimal layout position was around 120°(taking the position of crown as 0°)for the typical sections of Shang-hai subway.If the information of local soil was not enough,the tile sensor was recommended to be fixed at 120°.In a typical condition,the error from the analytical method was less than 4%,and the error from the numeri-cal method was less than 10%.In the field case,the error was less than 10%.If the field position was infeasible for installing the sensors,the offset scheme and its error correction method were given under different soil condi-tions.Seventy-one groups of field data from tilt sensors and laser range sensors were analyzed.The proposed method showed better agreement than three other methods.Its sum of squared difference was minimum,and its stability was suitable for field monitoring.

A Horizontal Convergence Monitoring Method Based on Wireless Tilt Sensors for Shield Tunnels with Straight Joints

Layout Optimization of Tilt Sensors for Convergence Monitoring in Shield Tunnel

Control of the Shield's Vertical Attitude During Shield Tunnelling in Soft Soils

Horizontal convergence reconstruction in the longitudinal direction for shield tunnels based on conditional random field

Data Analysis Of Shield Tunnel Deformation From Real-Time Monitoring With Wireless Sensing Network

Convergence deformation monitoring of shield tunnels based on distributed optical fiber strain sensing technique

Wireless Tilt Sensor Based Monitoring for Tunnel Longitudinal Settlement: Development and Application

Structural Monitoring And Performance Assessment Of Shield Tunnels During The Operation Period, Based On Distributed Optical-Fiber Sensors

Optimal Tilt Sensor Configuration of Urban Subway Shield Tunnel Structure

Computer Vision-based Monitoring Method for Differential Settlement of Shield Tunnels

Distributed Settlement and Lateral Displacement Monitoring for Shield Tunnel Based on an Improved Conjugated Beam Method

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

Comparative Performance Test of an Inclinometer Wireless Smart Sensor Prototype for Subway Tunnel

Real time monitoring method for the longitudinal settlement of shield tunnel using wireless inclinometer

Tunnel Deformation Monitoring Method based on Wireless Inclinometer

Monitoring the Behavior of Segment Joints in a Shield Tunnel Using Distributed Fiber Optic Sensors

Investigation On The Influence Caused By Shield Tunneling: Wsn Monitoring And Numerical Simulation

A monitoring strategy for longitudinal settlement of shield tunnel based on the improved conjugate beam method

Method for Tunnel Displacements Calculation Based on Mobile Tunnel Monitoring System

Deformation Monitoring of Metro Tunnel with a New Ultrasonic-Based System

Deformation Monitoring and Performance Analysis on the Shield Tunnel Influenced by Adjacent Deep Excavations