Abstract:Taking into account the local stresses resulting from the primary twinning with transformation strains, the competition between double twinning {10–11}–{10–12} and (10–12)–(–1012) (CDTW and EDTW) is theoretically modeled. Using electron backscatter diffraction technique, the statistical fractions, thickness-length ratios and their critical values of CDTW and EDTW within grains of as-cast AZ31 magnesium alloy sheets at the low strain stage of hot rolling processing are obtained to validate the theoretical results. In addition, the competition between the DTW and twin intersection are also discussed in detail. The results show that: (1) The secondary twin growth complies with the classical Hall-Petch relationship. Due to the difference in the driving forces resulting from different transformation strains between the primary extension and contraction twinning, the secondary extension twin of EDTW is more difficult to grow compared to that of CDTW for primary twin bands with small thickness-length ratios, which is contrary to the regulation for primary twin bands with large thickness-length ratios; (2) The greater the thickness-length ratio of the primary twinning is, the smaller the critical shear stress of the secondary twinning is. This is opposite to the effect of thickness-length ratio on the critical shear stress of the incident twinning in the twin intersection. It is indicated that the thickening of the primary twinning provides the higher driving force for the formation of DTW, however hinders the twin intersection more evidently; (3) Within coarse grains, at the low strain stage, the formation of DTW can dominantly induce dynamic recrystallization and continue plastic deformation, while the stress concentration resulting from the twin intersection is inclined to cause brittle fracture. Therefore, based on the effect of the local stress, the selection mechanism of the thickness-length ratio on the DTW and twin intersection is of great significance to determining the plastic performance of magnesium alloys during hot working. In the current study, massive control factors of the thickness-length ratio of the primary twinning are concluded, which provides some corresponding schemes of material design.

Pre-strain Effect on Twinning and De-Twinning Behaviors of Mg-3Li Alloy Traced by Quasi-in-situ EBSD

Effect of Pre-Strain on Extension Twinning Behavior in an Extruded AZ31 Mg Alloy Observed by In-Situ EBSD

Influence of Pre-Tension on Free-End Torsion Behavior and Mechanical Properties of an Extruded Magnesium Alloy.

Influence of Pre-Twinning on High Strain Rate Compressive Behavior of AZ31 Mg-alloys

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

The Effect of Twin–twin Interaction in Mg 3al 1zn Alloy During Compression

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

Twin-twin Geometric Structure Effect on the Twinning Behavior of an Mg-4Y-3Nd-2Sm-0.5Zr Alloy Traced by Quasi-in-situ EBSD

Quasi-in-situ study on {10-12} twinning-detwinning behavior of rolled Mg-Li alloy in two-step compression (RD)-compression (ND) process

EFFECT OF TWINNING ON MECHANICAL PROPERTY AND WORKABILITY OF Mg ALLOY

Effect of Local Stresses of Primary Twinning on Double Twinning, Twin Intersection and Their Competition

A Study of {10-12} Twinning Activity Associated with Stress State in Mg-3Al-1Zn Alloy during Compression

Effects of loading conditions on twin characteristics in an extruded Mg-Zr alloy

Strain Rate and Texture Effects on Microstructural Characteristics of Mg-3al-1zn Alloy During Compression

Twin Nucleation, Twin Growth and Their Effects on Annealing Strengths of Mg–Al–Zn–Mn Sheets Experienced Different Pre-Compressive Strains

Influence of Local Strain on Twinning Behavior During Compression of AZ31 Magnesium Alloy

Grain Size and Specimen Thickness Effects on Twinning Behaviors in High Strain Rate Deformation of Ultra-Thin Pure Titanium Sheet

{101¯2} Twinning Behavior under Biaxial Tension of Mg–3Al–1Zn Plate

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Influence of Twinning-Induced Recrystallization on Texture Evolution in a High Strain Rate Compressed Mg-Zn Alloy

The effect of pre-twinning on the mechanical behavior of free-end torsion for an extruded AZ31 magnesium alloy