Abstract:In this study, cement was used as a component to provide a stabilizing effect in order to evaluate the hardness and stability of loess soil. To evaluate the strength properties of loess soil reinforced with cement, samples with four distinct cement concentrations (3%, 5%, 7%, and 9%) and three distinct curing durations (7, 14, and 28 days) were generated. During a series of tests, the flexural strength, direct shear strength, indirect tensile strength, and unconfined compressive strength were determined. An appropriate cement dosage was found, in addition to a durability index that could be used to quantify the effect of water absorption investigations on cement-stabilized loess. Both of these discoveries were made simultaneously. Scanning electron microscopy (SEM) and energy dispersive X-ray fluorescence spectrometry (XRF) examinations were carried out so that the fundamental mechanics of the materials could be comprehended. The results show that the cohesion of cement-stabilized loess is much more sensitive to structure than the friction angle of the material. The increase in shear strength after remoulding is due to cohesion. The SEM study showed that the cement interacted with the loess particles to produce a thick cement network that successfully covered the voids and boosted the mixture’s strength parameters. The 28-days UCS for the samples containing 7% cement was the greatest, at 3.5 MPa, while the UCS for those containing 9% cement was 4.78 MPa. The highest flexural tensile strength of 1.98 N/mm2 was determined after 28 days. The tensile strength after 7 days in samples containing 3%, 5%, 7%, and 9% cement reached a maximum force of 0.15 MPa, 0.23 MPa, 0.27 MPa, and 0.37 MPa, respectively, and increased with each passing day. To achieve the desired level of strength, it is necessary to adjust the proportion of cement. In addition, as the curing period progressed, we observed an increase in the resistance and stiffness of the cement-stabilized loess due to the interactions that take place between the structure and the mineral composition. It is believed that this event was caused by naturally occurring cementation. As a consequence of this reaction, the production of new cementitious materials takes place. The cation exchange that causes the hydration and pozzolanic reaction that leads to the creation of aggregates and interparticle flocculation is responsible for their production. These findings suggest that cement may be utilised as a simple and effective method of loess stabilization, ultimately resulting in improved performance of the loess. Therefore, this study revealed that cement may considerably enhance the microstructure and strength parameters of loess. This research provides important information on cement-stabilized loess that has ramifications for geotechnical investigation, construction, research, and testing to achieve a successful project.

Dynamic Properties and Environmental Impact of Waste Red Mud-Treated Loess under Adverse Conditions

Mechanical Properties and Micro-Mechanism of Loess Roadbed Filling Using By-Product Red Mud As a Partial Alternative

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

Elastic modulus, water stability and resistivity for loess solidified with white mud based solid waste cementing material: Mechanism analysis and relationship establishment

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

Engineering Properties and Microstructure of Soils Stabilized by Red-Mud-Based Cementitious Material

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Influence of Red Mud on the Engineering and Microstructural Properties of Sustainable Ultra-High Performance Concrete

Experimental study on basic engineering properties of loess improved by burnt rock

Utilization of Red Mud and Pb/Zn Smelter Waste for the Synthesis of a Red Mud-Based Cementitious Material

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

Strength and deformation characteristics of waste mud–solidified soil

Research Enhancing Acidic Mine Wastewater Purification: Innovations in Red Mud–Loess

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Mechanical properties of loess subgrade treated by superabsorbent polymer

Experimental Study on Microstructure and Hydraulic Performance of Bentonite Modified Loess

Microstructure and Strength Parameters of Cement-Stabilized Loess

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Experimental Studies on the Mechanical Properties of Loess Stabilized with Sodium Carboxymethyl Cellulose

Experimental study on the performance of the modified loess by polypropylene fiber mixed with bentonite and cement

Study on Improving Loess Properties with Permeable Polymer Materials