Abstract:The study focuses on the synthesis of nanocomposites CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) using a hybrid chemical coprecipitation and sol–gel method. Validation of composite formation, incorporating distinct spinel and perovskite phases, is achieved through Fourier‐transform infrared spectroscopy. From X‐ray diffraction spectra, it can be concluded that average crystalline size calculated from Debye–Scherer and Williamson–Hall method increases on increasing the Sr substitution. Furthermore, the % crystallinity increases on increasing the Sr substitution. The scanning electron microscope analysis confirms the intricate 3D morphology observed in the composites. The electrocatalytic performance of these materials in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is evaluated. Notably, CoFe2O4–La0.2Sr0.8 CoO3 exhibits remarkable electrocatalytic activity, achieving current densities of j = 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at E = 650 mV. This underscores its potential as a catalyst for sustainable energy conversion processes. Overall, these findings highlight the promising application of spinel‐boosted perovskite composites in enhancing the efficiency of critical electrochemical reactions. CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) composites have been synthesized using a two‐step, low‐temperature wet chemical approach that combines coprecipitation and sol–gel techniques. The composite materials have been physicochemically analyzed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscope. The electrocatalytic properties of the composite materials have been assessed in terms of their performance in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. Cyclic voltammetry has been used for analyzing the redox behavior of the materials in 1 M KOH solution. The electrocatalytic activity of the materials has been assessed using anodic polarization curves on Ni substrate and the CoFe2O4–La0.2Sr0.8CoO3 film electrode demonstrates excellent activity, with current densities of 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at 650 mV. Also, the CoFe2O4–La0.2Sr0.8CoO3 film electrode has the maximum specific activity of 1.1 × 103 mA cm−2 g−1 at 650 mV toward OER. The electrodes' stability has been assessed through chronoamperometric experiments and additional insight into the enhancement of electrocatalytic activity gained through the electrochemical surface area estimations using electrochemical impedance spectroscopy. From chronoamperometric experiment, it has been observed that the CoFe2O4–La0.2Sr0.8CoO3 film electrode attains stability within 114 s with a current density of 108.7 mA cm−2. Furthermore, the thermodynamic parameters, including the standard enthalpy of activation (ΔH°#), standard entropy of activation (ΔS°#), and standard electrochemical energy of activation (ΔHel°# ), have been estimated by anodic polarization curve recorded in KOH as well as KOH with CH3OH solutions at various temperatures.

Morphological and Compositional Characterization of Electrochemically Active Perovskite Oxides for Sensing Biological Molecules

Synthesis of Perovskite-Type SrTiO3 Nanoparticles for Sensitive Electrochemical Biosensing Applications

Electrospun La0.8Sr0.2MnO₃ nanofibers for a high-temperature electrochemical carbon monoxide sensor.

Hierarchically structured cobalt oxide (Co3O4): the morphology control and its potential in sensors.

La0.67sr0.33mno3 Nanofibers for in Situ, Real-Time, and Stable High Temperature Oxygen Sensing

Electrospun porous La-Sr-Co-Ni-O nanofibers for highly sensitive non-enzymatic glucose detection

Sr and Fe substituted LaCoO 3 nano perovskites: Electrochemical energy storage and sensing applications

Sensitive Electrochemical Detection of Glucose Based on Electrospun La(0.88)Sr(0.12)MnO3 Naonofibers Modified Electrode.

Oxidase-Mimicking Activity Of Perovskite Lamno3+ Nanofibers And Their Application For Colorimetric Sensing

Compositional and Morphology Optimization to Boost the Bifunctionality of Perovskite Oxygen Electrocatalysts

Electrochemical hydrogen peroxide sensors based on electrospun La0.7Sr0.3Mn0.75Co0.25O3 nanofiber modified electrodes

Fabrication Of Oxidase-Like Hollow Mnco2o4 Nanofibers And Their Sensitive Colorimetric Detection Of Sulfite And L-Cysteine

Synthesis, Morphology and Electrochemical Performances of Perovskite-Type Oxide LaxSr1-xFeO3 Nanofibers Prepared by Electrospinning

Tailoring Spinel with Perovskite: Sr Substitution in the Perovskite Phase of CoFe2O4–LaCoO3 Nanocomposite for Oxygen Evolution and Methanol Oxidation in Alkaline Medium

In-Situ Co-Precipitation of Bi-Mof Derivatives for Highly Sensitive Electrochemical Glucose Sensing

Structure, Morphology and Electrochemical Properties of LaxSr1−xCo0.1Mn0.9O3−δ Perovskite Nanofibers Prepared by Electrospinning Method

Morphology-dependent Sensing Performance of CuO Nanomaterials

Constructing Morphologically Tunable Copper Oxide-Based Nanomaterials on Cu Wire with/without the Deposition of Manganese Oxide as Bifunctional Materials for Glucose Sensing and Supercapacitors

Fabrication Of High Performance Oxygen Sensors Using Multilayer Oxides With High Interfacial Conductivity

Hierarchical CNFs/MnCo 2 O 4.5 nanofibers as a highly active oxidase mimetic and its application in biosensing.

A Novel Route to Prepare LaNiO3 Perovskite-Type Oxide Nanofibers by Electrospinning for Glucose and Hydrogen Peroxide Sensing.