Abstract:Pole-to-pole dc short circuit fault blocking capability is a major concern when modular multilevel converters (MMCs) are applied in high voltage direct current (HVDC) transmission systems. Traditional MMCs based on half-bridge submodules (HBSMs) cannot block the fault current, thus needing expensive direct current circuit breakers (DCCBs). There are MMCs based on improved submodule topologies that can block dc faults, but usually with significantly increased device cost. This paper proposes an improved HBSM-based MMC (HB-MMC) which needs fewer extra semiconductor devices. The improved HB-MMC is more competitive than other schemes when it comes to investment cost and loss. An H-bridge circuit composed of two director switches and two diode valves is installed around one arm of the HB-MMC, which will not change the direction of current during the normal operation, whereas it can change the direction of the fault current when a pole-to-pole dc short circuits fault is detected. After two director switches have been turned off, a reverse-biased voltage provided by one arm can block the fault current. The topology can be further improved to provide reactive power during faults. Simulation results are presented to validate the features of the proposed improved HB-MMC.

Novel Submodule Topology with Large Current Operation and DC-fault Blocking Capability for MMC-HVDC

The Evolution and Variation of Sub-Module Topologies with DC-fault Current Clearing Capability in MMC-HVDC

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

An Improved Topology of Sub-module for MMC with DC Fault Clearing Ability

An MMC Topology Integrated With DC Circuit Breaker

An enhanced MMC topology With DC fault clearance capability

An Enhanced Mmc Topology With Dc Fault Ride-Through Capability

Modular Multilevel Converter with Embedded Energy Storage for Bidirectional Fault Isolation

A novel T-type half-bridge cell for modular multilevel converter with DC fault blocking capability

A Novel MMC Based on Series-Parallel Multiplex and Its Control Strategy for Flexible HVDC Application

An Improved Modular Multilevel Converter With DC Fault Blocking Capability Based on Half-Bridge Submodules and H-Bridge Circuit

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

Fault Characteristics and Control Strategies of Multiterminal High Voltage Direct Current Transmission Based on Modular Multilevel Converter

Modular Multilevel Converter Using IGCT-based Cross-Connected Modules for Medium Voltage DC Grids

A Combined Modular Multilevel Converters Topology with DC Fault Ride-Through Capability for Bulk Power Bipolar-HVDC Transmission Systems

Design of High Power Density Sub Module in Modular Multilevel Converter for VSC-HVDC Project

DC Fault Analysis and Protection Design in Shunt Modular Multilevel-Based MTDC System

The Coordinated Fault Current Limiting Strategy for a Hybrid Multilevel Modular Converter (MMC) Based VSC-HVDC Applications

A Modular Multilevel Converter Integrated with DC Circuit Breaker

A Low Conduction Loss Modular Multilevel Converter Topology with DC Fault Blocking Capability and Reduced Capacitance