Abstract:A reconfigurable electromagnetic surface has been studied to realize the adjustable orbital angular momentum (OAM) beams for real-time wireless communication and dynamic target detection in the future. OAM mode switching realized by many previous designs suffers from low gains without OAM beam scanning. In this article, a 1-bit reconfigurable reflectarray antenna is designed, fabricated, and tested for the real-time control of OAM mode switching and large-angle vortex beam scanning in three-dimensional space. The proposed reflectarray surface is composed of 1-bit electronically reconfigurable cells, and the size is 24 λ × 24 λ with 2304 units. The reconfigurable element is designed by using a radiation patch loading a PIN diode with effective control of two states, “ON” and “OFF”, for the demand of 180° phase difference. The reflectarray surface can be assigned to a code sequence of 0 or 1 by the Field-Programmable Gate Array (FPGA) in real time. Henceforth, the coding surface can dynamically control the generation of high-gain OAM beams, where only the optimized phase distributions on the surface need to be changed according to demand. To verify the concept, a large-scale reflectarray surface is fabricated and measured with an oblique feed at 15°. Different OAM-carrying phase distributions for different OAM beam states are calculated and tested. The test results show that the OAM mode switching between l = 1 and l = 2 is realized, and other variable modes such as l = 3 or l = 5 can also be achieved by modifying the phase encoding sequence. Furthermore, the direction of the vortex beams can be accurately controlled with gains over 20 dBi, and the large-angle vortex beam scanning is verified. Therefore, all results demonstrate that the proposed 1-bit reconfigurable reflectarray is efficient for the regulation and control of OAM-carrying beams for the demand of real-time dynamic wireless communications in the future.

A 10 240-Element Reconfigurable Reflectarray with Fast Steerable Monopulse Patterns

One‐bit Wideband Reconfigurable Reflectarray with Stable Beam‐scanning Gain for X‐band Application

Wideband Reconfigurable Reflectarray Based on Reflector-Backed Second-Order Bandpass Frequency Selective Surface

A Ka-Band 64-Element Four-Beam Phased Array Receiver with Inter-Beam Interference Cancellation

An X-band Reconfigurable Reflectarray Antenna with Steerable Monopulse Patterns

Design of a 64-Element Dual-Polarized Planar Receive Phased Array with Four Concurrent Reconfigurable Beams for Ka-Band SATCOM

Steerable Simultaneous Multibeam Antenna Based on Reconfigurable Reflectarray

The Design of a K-Band 256-Element Reconfigurable Multi-Beam Phased-Array for SATCOM Application

A Four-Element 7.5–9-Ghz Phased-Array Receiver with 1–8 Simultaneously Reconfigurable Beams in 65-Nm CMOS

A 4-Element 7.5-9 GHz Phased Array Receiver with 8 Simultaneously Reconfigurable Beams in 65 Nm CMOS Technology

A 1600-Element Dual-Frequency Electronically Reconfigurable Reflectarray at X/Ku-Band

A 1-Bit Multipolarization Reflectarray Element for Reconfigurable Large-Aperture Antennas

Reconfigurable Bidirectional Beam-Steering Aperture with Transmitarray, Reflectarray, and Transmit-Reflect-Array Modes Switching

Experimental study of a 1-bit 10×10 reconfigurable reflectarray antenna

A 1-Bit $10 \times 10$ Reconfigurable Reflectarray Antenna: Design, Optimization, and Experiment

Real-Time Mode Switching and Beam Scanning of High-Gain OAM Waves Using a 1-Bit Reconfigurable Reflectarray Antenna

Experimental Study of a 1-Bit 10&#x00d7;10 Reconfigurable Reflectarray Antenna

Lower Sidelobe Phased Array Based on Pattern Reconfigurable Elements

An mmWave FZP-Based Phased Array

On-chip Reconfigurable Reflectarray for 2-D Beam-Steering at W-band

Design and Experiment of a Dual-Band 1 Bit Reconfigurable Reflectarray Antenna with Independent Large-Angle Beam Scanning Capability