Abstract:In a conventional scheme of a Brillouin Optical Time Domain Reflector (BOTDR), an electro-optic modulator (EOM) or an acoustic optical modulator (AOM) is generally utilized to modulate the continuous light into the pulse probe light. However, the fluctuation of the working point will result in the instability of the extinction ratio when an EOM is selected, and a slow modulation speed will bring about the inability of modulating a narrow pulse when an AOM is chosen. In view of the above issue, a scheme for stably modulating the pulse probe light based on a semiconductor optical amplifier (SOA) is proposed. Meanwhile, the scheme integrates a pulse signal source with a synchronous trigger output to simplify the hardware structure of the system. Firstly, a SOA optic pulse modulator is used in the optic link to produce the pulse probe light into the sensing fiber, and coherent detection is used to obtain the beat signal of the Brillouin scattering. Moreover, the microwave frequency-sweeping method is adopted to acquire the variation curves of power with the fiber length at different frequency points. Then, the Brillouin Frequency Shift (BFS) distribution along the sensing fiber can be figured out by processing the acquired original data. Specially, in order to speed the data process, a software kernel of underlying Levenberg-Marquardt algorithm is developed based on C language, and the MFC message response mechanism and multi-thread characteristics are used to build a man-machine interface. Finally, the strain distribution along the fiber can be calculated based on the proportionality coefficient of BFS change versus strain change. The experiment results show that the BFS measurement accuracy of +/- 3.74 MHz is achieved over a 10.7-kilometer sensing fiber with the spatial resolution of 1.2 m, meanwhile the data processing time is reduced by about 45 times compared to that when using the LabVIEW, which indicates the stable and fast BFS measurement is realized.

A Brillouin Scattering Spectrum frequency shift extraction based on sparse constrainted cross-correlation iterative model

Feature Extraction of Brillouin Scattering Spectrum Based on Half-interval Search Frequency Sweep Method

Brillouin Frequency Shift Extraction Method for Distributed Optical Fiber Temperature Sensing System

Brillouin Frequency Estimation in Distributed Brillouin Optical Fiber Sensors

Fast Distributed Brillouin Optical Fiber Sensing for Dynamic Strain Measurement

A Stable And Fast Approach For Measuring Brillouin Frequency Shift

Compensation of the frequency fluctuations of light sources in distributed Brillouin sensor.

Fast BOTDA Sensing System Based on Coherent Detecting Digital Optical Frequency Comb

Recent Progress in Fast Distributed Brillouin Optical Fiber Sensing

Distributed Brillouin frequency shift extraction via a convolutional neural network

Brillouin Distributed Optical Fiber Sensor Based on a Closed-Loop Configuration

Distributed Brillouin Scattering Optical Fiber Strain Sensor Technology

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Single-Fiber-Based Brillouin Optical Time Domain Analysis with Far-End Modulation

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Scanning-free Hybrid Rayleigh-Brillouin Distributed Fiber-Optic Sensing System

Measurement Improvement of Distributed Optical Fiber Sensor Via Lorenz Local Single Peak Fitting Algorithm

Influence of Optical Simple Pulse Coding on the Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification

High-accuracy Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectra Measurement

Ultra-long Brillouin Optical Time-Domain Analyzer Based on Distortion Compensating Pulse and Hybrid Lumped–distributed Amplification

Pushing the Limit of the Distributed Brillouin Sensors for the Sensing Length and the Spatial Resolution