Abstract:Time-dependent plastic deformation, also known as creep, can occur in high-melting-point materials at room temperature when subjected to submicron plastic contact (e.g., components in micro-electronic mechanical systems) due to the extremely high stress conditions. Previous investigations of creep behavior at submicron scale mainly focus on uniform microstructures, whereas recently developed high-performance structural materials usually show complex microstructural heterogeneities. Here, we demonstrate a high-throughput nanoindentation approach to unveil the creep behavior of locally diverse microstructures, via a case study on an interstitial high-entropy alloy (iHEA). The prototype iHEA specimen was firstly pre-strained by severe cold-rolling to achieve diverse microstructure features including dense dislocations, nanotwins and nanograins. Nanoindentation mapping with 144 indents is conducted to collect creep data from all types of diverse microstructures, followed by systematical calculations based on power-law analysis. Then intuitive contour maps of nanohardness (H), strain rate (ε ̇) and stress exponent (n) are attained. The individual creep mechanism of each microstructure variant is evaluated by correlating local microstructure features with corresponding creep responses from these contour maps. With the increase of n value for different sample regions, the ε ̇ value inversely reduces and the corresponding dominant creep mechanism gradually converts from diffusion-mediated mode to dislocation-controlled one. The presence of nanograins and nanotwins significantly hinders dislocation interactions and promotes stress-induced diffusion. This work verifies that nanoindentation creep behavior is highly correlated with local microstructure features, and the mapping approach is feasible for evaluating creep-resistance of locally diverse microstructures under extremely high-stress conditions.

Characterization of mechanical properties of HP40Nb using indentation creep test

Effect of Overheating Temperature on the Microstructure and Creep Behavior of HP40Nb Alloy

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

Creep damage mechanism of 20Cr32Ni1Nb steel at high temperatures

Experimental characterization of flat indentation creep behaviour of Inconel 617

Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy

Effects of loading rate and peak load on nanoindentation creep behavior of DD407Ni-base single crystal superalloy

Study on the High Temperature Creep Behavior of 30Cr25Ni20 Heat-Resistant Steel

High temperature deformation behaviors of a high Nb containing TiAl alloy

TENSILE CREEP BEHAVIOR OF DIRECTIONALLY SOLIDIFIED NiAl-28Cr-5.8Mo-0.2Hf ALLOY

Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping

Effects of creep and oxidation on reduced modulus in high-temperature nanoindentation

Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy

On Extracting Mechanical Properties from Nanoindentation at Temperatures up to 1000$^{\circ}$C

High temperature creep behavior of a novel Cr18Ni9NbTiN austenitic stainless steel

High temperature creep of NiAl-Cr(Zr) intermetallic alloy

High Temperature Creep Behavior of an As-Cast Near-Α Ti–6Al–4Sn–4Zr-0.8Mo–1Nb–1W-0.25Si Alloy

Nano-Indentation Creep Behavior of the Vacuum Electron Beam Weldment of 12cr10co3w2monivnbnb Heat Resistant Steel