Abstract:To explore the influence of openings on wind loads and wind speeds in high-rise buildings, the wind flow around three-dimensional (3D) square cylinders with a breadth/height aspect ratio of 1:6 was numerically simulated using the large eddy simulation (LES) method via the Fluent 15.0 platform. The opening measures in the X-direction, Y-direction and both directions were all taken into consideration. Firstly, the inflow turbulence synthesis method and parameter settings for LES were verified by comparing the simulation results of standard square cylinders with those of wind tunnel experiments, and the optimal boundary conditions were determined. Then, the wind speed was extracted and compared with the mean wind speed of incoming flow at the same height to analyze the influence of different opening measures on the wind speed of incoming flow by setting monitoring points in the open holes. Finally, the mechanism underlying the effect of the opening form on wind loads and wind speeds was analyzed from the perspective of time-averaged and transient flow field. The results show that the X-direction openings affect the magnitude and distribution of the surface wind pressures by changing the flow separation and flow reattachment. The narrow tube effect can significantly increase the wind speed, while the Y-direction openings have no obvious improvement effect on the surface wind pressures of the structure. The wind speeds in the open holes are greatly reduced due to the shielding effect, and the wind pressures are also reduced for the Y-direction openings. In the X-direction opening holes, the wind speed at the monitoring point increases, while it decreases in the crosswind open holes. In general, the measure of openings in the X-direction can greatly improve the wind load of the structure compared to openings in the Y-direction, and it can provide a good reference for wind power generation in high-rise buildings.

Experimental Study on Wind Load Characteristics of High-Rise Buildings with Opening

Study of Wind Loads and Wind Speed Amplifications on High-Rise Building with Opening by Numerical Simulation and Wind Tunnel Test

Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings

Wind Tunnel Experimental Study of Wind Pressure Distribution on Tall Buildings Considering Surrounding Interference

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Wind Loads Characteristics of Irregular Shaped High-Rise Buildings

Numerical Simulation on Wind Speed Amplification of High-Rise Buildings with Openings

Steady-state and transient wind characteristics of low-rise building roofs with openings in vulnerable areas

Wind tunnel test study on local wind pressure of rectangular super high-rise building with openings

Wind Tunnel Study of Wind-Induced Torques on L-shaped Tall Buildings

Investigation Of Wind Effect Reduction On Square High-Rise Buildings By Corner Modification

Wind Tunnel Test and Numerical Simulation of Wind-Induced Loads on Complex-Shaped High-Rise Buildings

Wind Tunnel Study of Wind Effects on 90° Helical and Square Tall Buildings: A Comparative Study

Influence of Sudden Opening on Static and Dynamic Wind Load for Flat Roof Structures

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study

Wind-Induced Internal Pressures of Buildings with Multiple Openings

Experimental Analysis of Wind Pressure Characteristics in a Reduced-Scale Model of a Slab-Shaped High-Rise Building at Different Inflow Conditions with Various Wind Flow Directions

Research on the characteristics of wind pressures on L-shaped tall buildings:

Analysis of Three Dimensional Equivalent Static Wind Loads of Symmetric High-Rise Buildings Based on Wind Tunnel Tests

Investigation of wind load characteristics of cantilevered scaffolding of a high-rise building based on field measurement

Study on opening ventilation to reduce the wind load on a super tall building with recession corner *