Abstract:Silicon dioxide aerogel is a polymer material with excellent properties, making it highly promising in various fields such as thermal insulation, acoustic absorption, and aerospace. However, the main challenge lies in the poor mechanical properties of silica aerogels. In this study, we present a method to reinforce silica aerogel materials using bacterial cellulose (BC). Our approach is environmentally friendly as it utilizes a pure aqueous solvent for the preparation of BC composite aerogels. This eliminates the need for any organic solvents and solvent substitution, making the process greener. Additionally, the preparation process can be completed using atmospheric pressure drying. To our surprise, we discovered that BC not only enhances the mechanical properties of the composite silica aerogel but also improves its thermal stability and hydrophobicity. Bacterial cellulose is a natural biopolymer with an ultrafine nanofibrous reticulated matrix and crosslinking active sites. In this work, composite silica aerogels were prepared using a two‐step acid‐base catalysis and ambient pressure drying, with methyltriethoxysilane as the silica precursor and a trace amount of bacterial cellulose as the silicon skeleton reinforcement. The preparation was carried out in water without the addition of other organic solvents and without solvent replacement. The preparation conditions were optimized, and the prepared composite aerogels were characterized using SEM, BET, FTIR, a contact angle meter, and GA‐DTA. The results showed that the introduction of a trace amount of bacterial cellulose could obviously change the morphology and hydrophilicity of the aerogels, and increase its compressive strength up to 5 MPa without significant changes in its specific surface area and density. The addition of bacterial cellulose helped the aerogels maintain its original shape after being heated at high temperatures.

Effect of Immersion Process on the Properties and Structure of Cellulose Nanofibril/Silica Composite Aerogels

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method

Facile preparation of Bacterial cellulose‐SiO2 composite aerogel with good mechanical strength and thermal stability

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

Mechanically Strong and Thermally Responsive Cellulose Nanofibers/Poly(N-isopropylacrylamide) Composite Aerogels

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

An Overview on Cellulose/silica Organic-Inorganic Hybrid Composite Aerogels

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

Synthesis and characterization of carbon nanofibers doped silica aerogels

Multiscale Nanocelluloses Hybrid Aerogels for Thermal Insulation: the Study on Mechanical and Thermal Properties.

Preparation and Characterization of Composite SiO2 Aerogel by a Novel One-step Modified Process

Cellulose nanofiber aerogels: effect of the composition and the drying method

Poly(vinyl Alcohol)/cellulose Nanofibril Hybrid Aerogels with an Aligned Microtubular Porous Structure and Their Composites with Polydimethylsiloxane.

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Transparent Aerogels with High Mechanical Strength Composed of Cellulose-silica Cross-linked networks

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Cellulose Aerogels Prepared from Cellulose/amimcl Solutions

Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization