Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Environmental‐Friendly Urea Additive Induced Large Perovskite Grains for High Performance Inverted Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

High-performance Perovskite Solar Cells from Large Perovskite Grain Size by the Urea Additive

Improved Performance of Carbon Electrode Perovskite Solar Cells Using Urea Treatment in Two‐Step Processing

High-performance Perovskite Solar Cells with Large Grain-Size Obtained by the Synergy of Urea and Dimethyl Sulfoxide

Self-Sacrificed Additive in Preparing PbI2 Film Enables the Oriented Growth of Perovskite Crystals for Improved Solar Cell Performance

Enhanced Optoelectronic Quality of Perovskite Films with Excess CH3NH3I for High-Efficiency Solar Cells in Ambient Air

Multifunctional Imidazolidinyl Urea Additive Initiated Complex with PbI2 Toward Efficient and Stable Perovskite Solar Cells

Multidentate Coordination Induced Crystal Growth Regulation and Trap Passivation Enables over 24% Efficiency in Perovskite Solar Cells

Thermally Induced Crystallization of High Quality CH3 NH3 PbI3 Film with Large Grains for Highly Efficient Perovskite Solar Cells.

High Quality Perovskite Thin Films Induced By Crystal Seeds With Lead Monoxide Interfacial Engineering

Fabrication of Perovskite Films with Long Carrier Lifetime for Efficient Perovskite Solar Cells from Low Toxicity 1 Ethyl 2 Pyrrolidone

Mesoporous PbI2 Assisted Growth of Large Perovskite Grains for Efficient Perovskite Solar Cells Based on ZnO Nanorods

Enhancing Organic‐Inorganic Perovskite Thin Film Crystallization via Vapor‐Solid Reaction by Modifying PbI2 Precursors films with Pyridinium Trifluoromethanesulfonate

Effects of Organic Cation Additives on the Fast Growth of Perovskite Thin Films for Efficient Planar Heterojunction Solar Cells.

Regulation of Lead Iodide Crystallization and Distribution for Efficient Perovskite Solar Cells

In Situ Dehydration Condensation of Self‐Assembled Molecules Enables Stabilization of CsPbI3 Perovskites for Efficient Photovoltaics

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Preparing High-Efficiency Perovskite Solar Cells

2,2‐Azodi(2‐Methylbutyronitrile)‐coordinated Intermediate Phase Engineering for Efficient and Stable Perovskite Solar Cells

Anion Exchange Promoting Non-Impurities Enables Conformable and Efficient Inverted Perovskite Solar Cells