Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

High Quality Perovskite Thin Films Induced By Crystal Seeds With Lead Monoxide Interfacial Engineering

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Interfacial Engineering of Perovskite Solar Cells with Evaporated PbI 2 Ultrathin Layers

Seed-Mediated Growth for High-Efficiency Perovskite Solar Cells: The Important Role of Seed Surface

(Invited) Improvement of Perovskite Films and the Perovskite/TiO2Interface

SnO2-Based Interfacial Engineering towards Improved Perovskite Solar Cells

Tailored Interfacial Crystal Facets for Efficient CH3NH3PbI3 Perovskite Solar Cells

Thiazole-Induced Surface Passivation and Recrystallization of CH3NH3PbI3 Films for Perovskite Solar Cells with Ultrahigh Fill Factors.

Controllable Grain Morphology Of Perovskite Absorber Film By Molecular Self-Assembly Toward Efficient Solar Cell Exceeding 17%

Regulation of Lead Iodide Crystallization and Distribution for Efficient Perovskite Solar Cells

Achieving the High Phase Purity of CH 3 NH 3 PbI 3 Film by Two-Step Solution Processable Crystal Engineering

Enhancing Organic‐Inorganic Perovskite Thin Film Crystallization via Vapor‐Solid Reaction by Modifying PbI2 Precursors films with Pyridinium Trifluoromethanesulfonate

Synergic Solventing-out Crystallization with Subsequent Time-Delay Thermal Annealing of PbI2 Precursor in Mesostructured Perovskite Solar Cells

Improved Crystallinity of Perovskite Via Molecularly Tailored Surface Modification of SnO2

RbPbI3 Seed Embedding in PbI2 Substrate Tailors the Facet Orientation and Crystallization Kinetics of Perovskites

Enhancing Perovskite Solar Cell Performance Through Surface Engineering of Metal Oxide Electron-Transporting Layer

Controlled Growth of Textured Perovskite Films Towards High Performance Solar Cells

Anion Exchange‐Induced Crystal Engineering via Hot‐Pressing Sublimation Affording Highly Efficient and Stable Perovskite Solar Cells

Thermally Induced Crystallization of High Quality CH3 NH3 PbI3 Film with Large Grains for Highly Efficient Perovskite Solar Cells.

Engineering the buried interface in perovskite solar cells via lattice-matched electron transport layer