Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

RbPbI3 Seed Embedding in PbI2 Substrate Tailors the Facet Orientation and Crystallization Kinetics of Perovskites

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Modulation of Nucleation and Crystallization in PbI2 Films Promoting Preferential Perovskite Orientation Growth for Efficient Solar Cells

Facet orientation tailoring via 2D-seed- induced growth enables highly efficient and stable perovskite solar cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

2D Perovsktie Substrate-Assisted CsPbI 3 Film Growth for High-Efficiency Solar Cells

Synergic Solventing-out Crystallization with Subsequent Time-Delay Thermal Annealing of PbI2 Precursor in Mesostructured Perovskite Solar Cells

Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

Single‐Crystal Seeds Inducing the Crystallization of High‐Performance α‐FAPbI3 for Efficient Perovskite Solar Cells

Achieving stable and high-efficiency (>21%) lead halide perovskite solar cells with δ-CsPbI2Br seed–assisted growth strategy

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells

Rapid Nucleation and Slow Crystal Growth of CsPbI3 Films Aided by Solvent Molecular Sieve for Perovskite Photovoltaics

Seed-Mediated Growth for High-Efficiency Perovskite Solar Cells: The Important Role of Seed Surface

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

Tailoring Crystallization Dynamics of CsPbI3 for Scalable Production of Efficient Inorganic Perovskite Solar Cells

Tailored Interfacial Crystal Facets for Efficient CH3NH3PbI3 Perovskite Solar Cells

Controllable Heterogeneous Seeding Induced Crystallization for High‐Efficiency FAPbI3‐Based Perovskite Solar Cells Over 24%

Synergetic Excess PbI2 and Reduced Pb Leakage Management Strategy for 24.28% Efficient, Stable and Eco‐Friendly Perovskite Solar Cells

Heterogeneous Seed-Assisted FAPbI3 Crystallization for Efficient Inverted Perovskite Solar Cells

Amino acid salt Induced PbI2 crystal orientation Optimization for High-Efficiency Perovskite Solar Cells with Long-Term Stability