Abstract:This report focuses on the evaluation of the electrochemical properties of both solution-deposited sol-gel (sg-ZnO) and sputtered (sp-ZnO) zinc oxide thin films, intended for use as electron-collecting interlayers in organic solar cells (OPVs). In the electrochemical studies (voltammetric and impedance studies), we used indium-tin oxide (ITO) over coated with either sg-ZnO or sp-ZnO interlayers, in contact with either plain electrolyte solutions, or solutions with probe redox couples. The electroactive area of exposed ITO under the ZnO interlayer was estimated by characterizing the electrochemical response of just the oxide interlayer and the charge transfer resistance from solutions with the probe redox couples. Compared to bare ITO, the effective electroactive area of ITO under sg-ZnO films was ca. 70%, 10%, and 0.3% for 40, 80, and 120 nm sg-ZnO films. More compact sp-ZnO films required only 30 nm thicknesses to achieve an effective electroactive ITO area of ca. 0.02%. We also examined the electrochemical responses of these same ITO/ZnO heterojunctions overcoated with device thickness pure poly(3-hexylthiophehe) (P3HT), and donor/acceptor blended active layers (P3HT:PCBM). Voltammetric oxidation/reduction of pure P3HT thin films on ZnO/ITO contacts showed that pinhole pathways exist in ZnO films that permit dark oxidation (ITO hole injection into P3HT). In P3HT:PCBM active layers, however, the electrochemical activity for P3HT oxidation is greatly attenuated, suggesting PCBM enrichment near the ZnO interface, effectively blocking P3HT interaction with the ITO contact. The shunt resistance, obtained from dark current-voltage behavior in full P3HT/PCBM OPVs, was dependent on both (i) the porosity of the sg-ZnO or sp-ZnO films (as revealed by probe molecule electrochemistry) and (ii) the apparent enrichment of PCBM at ZnO/P3HT:PCBM interfaces, both effects conveniently revealed by electrochemical characterization. We anticipate that these approaches will be applicable to a wider array of solution-processed interlayers for "printable" solar cells.

Influence of ZnO Interlayer on the Performance of Inverted Organic Photovoltaic Device

Efficiency enhancement of inverted organic photovoltaic devices with ZnO nanopillars fabricated on FTO glass substrates

Effect of Electron Collecting Metal Oxide Layer in Normal and Inverted Structure Polymer Solar Cells

Exquisite modulation of ZnO nanoparticle electron transporting layer for high-performance fullerene-free organic solar cell with inverted structure

Solution processed nano-ZnMgO interfacial layer for highly efficient inverted perovskite solar cells

Characterization of ZnO Interlayers for Organic Solar Cells: Correlation of Electrochemical Properties with Thin-Film Morphology and Device Performance

The Effect of Modified Layers on the Performance of Inverted ZnO Nanorods/meh-Ppv Solar Cells

The Performance Comparison Between Fullerene and Nonfullerene Interlayers in Inverted Organic Solar Cells

Improving the Efficiency of Inverted Organic Solar Cells by Introducing Ferrocenedicarboxylic Acid Between an ITO/ZnO Interlayer

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells

Employing Inorganic/Organic Hybrid Interface Layer to Improve Electron Transfer for Inverted Polymer Solar Cells

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Device Modeling and Design of Inverted Solar Cell Based on Comparative Experimental Analysis between Effect of Organic and Inorganic Hole Transport Layer on Morphology and Photo-Physical Property of Perovskite Thin Film

Effects of ZnO Fabricating Process on the Performance of Inverted Organic Solar Cells

Strontium Fluoride and Zinc Oxide Stacked Structure As an Interlayer in High-Performance Inverted Polymer Solar Cells

Effect of Crystallinity Modulation Between Electron Transport Layer and Photo‐Generation Materials on ZnO‐Based Polymer Solar Cells

The Effect of Atmosphere and ZnO Morphology on the Performance of Hybrid Poly(3-hexylthiophene)/ZnO Nanofiber Photovoltaic Devices

Interfacial Engineering of Zno Nanoarrays As Electron Transport Layer for Polymer Solar Cells

Delicate Energy-Level Adjustment and Interfacial Defect Passivation of ZnO Electron Transport Layers in Organic Solar Cells by Constructing ZnO/In Nanojunctions

N-type Small Molecule As an Interfacial Modification Layer for Efficient Inverted Polymer Solar Cells

The effect of ZnO preparation on the performance of inverted polymer solar cells under one sun and indoor light