Abstract:Undecorated and Pt-decorated SnO2 nanoparticles (NPs) were prepared using sol-gel and hydrothermal methods. The tin dioxide NPs, as sensing materials, were screen printed on alumina substrates with Pt test electrode to fabricate the gas sensors. The characteristics of these gas sensors in terms of composition, morphology, and sensing property were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical workstation, respectively. The results elucidated that the response time of Pt-decorated SnO2 sensor to 100 ppm H-2 is 29 s at 350 degrees C, which is almost half of that of pure SnO2 gas sensor. Meanwhile, the effect of operating temperature and Pt decorating on the sensing properties and the 'n' value is studied. Comparing with many fabricated H-2 gas sensors, our as-prepared sensor exhibits not only a high response time but also detects H-2 gas down to 0.08 ppm. To the author's best knowledge, the detection limit of 0.08 ppm is the best reported detection limit for the gas sensors based on tin oxide NPs so far. Moreover, there is a significant enhancement in the selectivity of Pt-decorated SnO2 sensor to the H-2 gas against other investigated gases such as carbon monoxide (CO), methane (CH4), nitrogen dioxide (NO2), sulfur dioxide (SO2). Overall, the obtained results clearly demonstrate that the Pt-decorated SnO2 is an excellent sensing material for the fabrication of gas sensors and the detection of trace concentration of H-2 down to 0.08 ppm. Furthermore, the results of statistical and fractal analysis on 2D microstructures of FESEM images showed a coefficient correlation of about 0.991 for all the samples. (C) 2019 Elsevier B.V. All rights reserved.

Highly Selective Detection of Trace Hydrogen Against CO and CH4 by Ag/Ag2O–SnO2 Composite Microstructures

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Tin oxide/graphene composite fabricated via a hydrothermal method for gas sensors working at room temperature

High selectivity and response H2 sensors based on ZnO@ZIF-71@Ag nanorod arrays

A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Selective Gas Detection Using Mn3O4/WO3 Composites As a Sensing Layer

Designed Synthesis of ZnO/Pd@ZIF-8 Hybrid Structure for Highly Sensitive and Selective Detection of Methane in the Presence of NO2

High performance H2 sensor based on rGO-wrapped SnO2–Pd porous hollow spheres

High-Selectivity Hydrogen Gas Sensors based on Mesoporous PbOx-ZnO Nanocomposites

Selectivity sensing response of ZnO-xCo3O4 based sensor to CO against CH4

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Ag Nanoparticle-Modified ZnO–In2O3 Nanocomposites for Low-Temperature Rapid Detection Hydrogen Gas Sensors

Tin dioxide nanoparticles with high sensitivity and selectivity for gas sensors at sub-ppm level of hydrogen gas detection

Preparation of H2 and LPG Gas Sensor

Gas Sensing Selectivity of SnO 2 -xNiO Sensors for Homogeneous Gases and its Selectivity Mechanism: Experimental and Theoretical Studies

Ultralow detection limit and ultrafast response/recovery of the H2 gas sensor based on Pd-doped rGO/ZnO-SnO2 from hydrothermal synthesis

Preparation of a high-performance H2S gas sensor based on CuO/Co3O4 composite derived from bimetallic MOF

Highly Sensitive Detection of Hydrogen Gas Using Nanoporous Composites of Halloysite Nanotubes and Palladium

Low Operating Temperature Hydrogen Sensor Based On Sno2 Hollow Nanospheres