Abstract:According to the requirements on minimizing the package size, guaranteeing the performance uniformity and improving the manufacturing efficiency in LEDs, a Chip Scale Packaging (CSP) technology has been developed to produce white LED chips by impressing a thin phosphor film on LED blue chips. In this paper, we prepared two types of phosphor-converted white LED CSPs with high color rendering index $(\mathbf{CRI} > 80, \mathbf{CCT}\sim 3000$ K and 5000K) by using two mixed multicolor phosphor materials. Then, a series of testing and simulations were conducted to characterize both short- and long-term performance of prepared samples. A thermal analysis through both IR thermometry and electrical measurements and thermal simulation were conducted first to evaluate chip-on-board heat dissipation performance. Next, the luminescence mechanism of multicolor phosphor mixtures was studied with the spectral power distribution (SPD) simulation and near-field optical measurement. Finally, the extracted features of SPDs and electrical current-output power (I-P) curves measured before and after a long-term high temperature accelerated aging test were applied to analyze the degradation failure mechanisms. The results of this study show that: 1) The thermal management for prepared CSP samples provides a safe usage condition for packaging materials at ambient temperature; 2) The Mie theory with ray-tracing simulation can be used to simulate the SPD of Pc-white LEDs with mixed multicolor phosphors; 3) The degradation failure mechanisms of Pc-white LEDs can be determined by analyzing the extracted features of SPDs collected after aging.

Phosphors and White LED Packaging

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Spectral Properties of Alkaline Earth Composite Silicate Phosphors for White-LED

Novel Measurement System and Analytical Method for White LED Phosphors

A Fluorescein-Centered Polymer As a Phosphor for Fabricating Pure White Light-Emitting Diodes

Glass-ceramic Phosphors for Solid State Lighting: A Review

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

Excellent color quality of phosphor converted white light emitting diodes with remote phosphor geometry

Packaging Technique of High-power White LED

Characterization, packaging, and optical model of single-primary color phosphor thin films and LEDs

High-efficiency Technology of LED White Light Based on Phosphor Glass

Realizing White LEDs with High Luminous Efficiency and High Color Rendering Index by Using Double Green Phosphors

Spectral Re-Absorption Effect of Multi-Primary Phosphor Thin Films and Various Package Structures on the Performance of Near-Ultraviolet White LED

Highly Efficient Blue‐Emitting Phosphor via Charge Compensation Strategy and its Application for White LED Lighting

Rare Earth (RE) doped color tunable phosphors for white light emitting diodes

CaS: Sb3+, Na and ZnS:Sn2+: phosphor materials for the improvement of WLEDs

Green and Orange Emissive Carbon Dots with High Quantum Yields Dispersed in Matrices for Phosphor-Based White LEDs

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

Review on advancements in white light phosphor matrices for energy-efficient lighting

Selection of Remote Phosphor Led Packages for Improving Luminous Flux

Simulation of optical behavior of YAG:Ce3+@SiO2 phosphor used for chip scale packages WLED