Abstract:Cobalt-free perovskite oxides Ba1−xLaxFeO3−δ (x = 0.1–0.4) were synthesized by glycine-nitrate combustion method and investigated as a candidate cathode material for intermediate temperature solid oxide fuel cells (IT-SOFCs). Cubic perovskite structure was obtained when 10–20 mol% La was substituted at Ba-site in Ba1−xLaxFeO3−δ, and the crystal structure was transformed from cubic structure into orthorhombic one at x ≥ 0.2 with an addition of lanthanum doping. The thermal expansion coefficients of Ba1−xLaxFeO3−δ oxides decreased gradually with La content due to increasing electrostatic attraction forces. A gradual increase existed in electrical conductivity tendency with La content due to disproportionation of Fe3+ and the larger extent of electron clouds. The electrode redox performance was investigated by electrochemical impedance spectroscopy. Among Ba1−xLaxFeO3−δ series oxides, Ba0.9La0.1FeO3−δ exhibited the best electrochemical performance. The area specific resistance (ASR) of Ba0.9La0.1FeO3−δ was 0.079 Ω cm2, 0.37 Ω cm2, and 2.15 Ω cm2 at 800, 700 and 600 °C under open circuit potential. To investigate electrochemical performances after cathodic polarization, bias potentials were employed on Ba1−xLaxFeO3−δ cathode at 650–800 °C. The results demonstrated the potential applications for Ba0.9La0.1FeO3−δ as cathode materials for IT-SOFCs as a tradeoff between electrochemical and thermal expansion performance.

Novel Cobalt-Free Layered Perovskite LaBaFe2-xNbxO6-δ (x=0–0.1) As Cathode for Solid Oxide Fuel Cells

A Highly Stable Cobalt-Free Laba0.5sr0.5fe2o6-Delta Oxide As A High Performance Cathode Material For Solid Oxide Fuel Cells

Highly Active and Stable Tin-Doped Perovskite-Type Oxides As Cathode Materials for Solid Oxide Fuel Cells

Electrode redox properties of Ba 1−x La x FeO 3−δ as cobalt free cathode materials for intermediate-temperature SOFCs

A highly stable cobalt-free LaBa0.5Sr0.5Fe2O6-δ oxide as a high performance cathode material for solid oxide fuel cells

Boosting the Electrochemical Performance of Cobalt-Free Fe-Based Cathodes by Calcium-Doping for Solid Oxide Fuel Cells

A Novel Layered Perovskite Nd(Ba0.4Sr0.4Ca0.2)Co1.6Fe0.4O5+δ As Cathode for Proton-Conducting Solid Oxide Fuel Cells

Promotion On Electrochemical Performance Of Ba-Deficient Ba1- Xbi0.05co0.8nb0.15o3- (Delta) Cathode For Intermediate Temperature Solid Oxide Fuel Cells

Ba1−xCo0.9−yFeyNb0.1O3−δ (x = 0–0.15, Y = 0–0.9) As Cathode Materials for Solid Oxide Fuel Cells

Nanostructured La0.5Ba0.5CoO3 as cathode for solid oxide fuel cells

BaCo(1-x)NbxO(3-delta) as a Promising Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Cobalt-Free Perovskite Oxide La0.6Sr0.4Fe0.8Ni0.2O3−δ As Active and Robust Oxygen Electrode for Reversible Solid Oxide Cells

Alkaline-earth-free Quasi-Ternary La(Co, Ni, Fe)O3-delta Perovskite As Potential Cathode for Solid Oxide Fuel Cells

La0.4Bi0.4Sr0.2FeO3-δ As Cobalt-free Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

La-doped Ba0.5Sr0.5Co0.8Fe0.2O3- D As Cathode for Protonic-Conducting Solid Oxide Fuel Cells with Enhanced Structure Stability

LaCoO3-δ-coated Ba0.5Sr0.5Co0.8Fe0.2O3-δ: A Promising Cathode Material with Remarkable Performance and CO2 Resistance for Intermediate Temperature Solid Oxide Fuel Cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

High-performance fluorine-doped cobalt-free oxide as a potential cathode material for solid oxide fuel cells

High-performance La0.5(Ba0.75Ca0.25)0.5Co0.8Fe0.2O3-δ cathode for proton-conducting solid oxide fuel cells

Characterization and electrochemical performances of Ba2-xSrxFeO4+δ as a novel cathode material for intermediate-temperature solid oxide fuel cells

Application of Lattice Expansion Effect in SrCoO3 Based Cathodes by Ba Doping with Elevated Electrochemical Performances for Low-Temperature Solid Oxide Fuel Cells