Abstract:Long-term successful function of artificial hip joint replacements strongly depends on the design parameters of the bearing such as the diameters of femoral head and acetabular cup and the corresponding radial clearance, which determine the lubrication regime experienced in the prostheses. Generally, there are two types of numerical models for elastohydrodynamic lubrication analysis of the bearing in the hip joint replacements: ball-in-socket model and effective ball-on-plane model. As the real hip joint is in ball-in-socket configuration, the ball-in-socket lubrication model should be the reasonable approximation to the real bearing. The ball-in-socket model solves a lubrication problem in spherical coordinates, which means all of governing equations, including Reynolds equation, film thickness and load balance equation, should be written as the spherical coordinate forms. In addition, the calculation of the elastic deformation of the bearing surfaces in artificial joints is not a trial problem. Complex spherical geometries in the joint bearing often require employing the finite element method to determine/extract the displacement influence coefficients at first, and then the deformation is evaluated through using an equivalent discrete spherical convolution model (EDSC). Fortunately, the FFT-based approach is recently developed to speed up the deformation calculation. In comparison with the ball-in-socket model, the effective ball-on-plane model is simple and easy to conduct elastohydrodynamic lubrication analysis. The main characteristic of the effective ball-on-plane model is that the elastic deformation was evaluated under an assumption of semi-infinite solid and certainly without the consideration of the curvature effect associated with the ball-in-socket configuration. In the present study, some typical cases of elastohydrodynamic lubrication analysis for hip joint replacements were conducted to systematically demonstrate the capability of these two models. It was found that the two models were able to provide quite close results in most situations, and the difference may only take place when the head is positioned near the edge of the cup bearing surface.

Design for artificial hip joint wear tester's driving method based on adjustment of Euler angle

Advances in artificial joint bio-friction and wear simulation assessment technology

Modeling and simulation of wear for alignment mechanism of large aircraft component

Numerical lubrication simulation of metal-on-metal artificial hip joint replacements: ball-in-socket model and ball-on-plane model

Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model

Effect of Progressive Wear on the Contact Mechanics of Hip Replacements – Does the Realistic Surface Profile Matter?

Stress Analysis and Shape Design of a Femoral Hip Prosthesis

A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty

How have wear testing and joint simulator studies helped to discriminate among materials and designs?

Numerical investigation on the wear characteristics of hip implant under static loading

Friction measurement in a hip wear simulator

Human Hip Joint Center Analysis for Biomechanical Design of a Hip Joint Exoskeleton.

Computational Wear Prediction for Impact of Kinematics Boundary Conditions on Wear of Total Knee Replacement Using Two Cross-Shear Models

Biomechanics Characteristics of New Type Artificial Hip Joint

Non‐spherical shape optimization of artificial hip joint based on elastohydrodynamic lubrication analysis

Wear prediction for metal-on-metal hip joint replacements

Development of a ten-station, multi-axis hip joint simulator

Computer-Aided Modeling of Hip Joint and Geometric Morphological Analysis

[A Study on New Computer-Aided Modeling Method of Hip Joint].

Total Hip Wear Assessment: A Comparison Between Computational and In Vitro Wear Assessment Techniques Using ISO 14242 Loading and Kinematics