Advancements in design of radiant floor heating systems with an innovative simplified calculation method
Meijie Wang,Jiali Wang,Jiawei Xu
DOI: https://doi.org/10.1080/23744731.2024.2351312
2024-05-22
Science and Technology for the Built Environment
Abstract:The calculation accuracy of existing simplified methods for radiant floor heating systems (RFHS) is far from meeting the growing demand for energy saving. Therefore, an innovative steady-state simplified method is proposed based on conduction shape factors, equivalent thickness, and mirror principle. The new model is validated by experimental data and compared with an equally simple simplified method. Meanwhile, the effects of the total heat-transfer coefficient of radiant surfaces and fluid flow rate in heating pipes on the calculated results are discussed. The calculation flowchart is given. Parameter influence and sensitivity analysis are then performed. The results show that the new simplified model agrees well with experimental data, and the maximum relative error is 7.9% for heat flux and 2.0% for surface temperature. Standard deviation reduces by 68.5% and 66.8% for the heat flux and surface temperature, respectively, compared to the equally simple existing simplified method. With the same absolute increment of pipe pitch, the smaller the pipe spacing, the faster is the heat flux and surface temperature change. The order of importance of influential parameters is mean water temperature > indoor air temperature > pipe pitch > thermal conductivity of filling layer > thermal conductivity of pipe wall.
engineering, mechanical,thermodynamics,construction & building technology