Abstract:As a promising energy source, direct borohydride fuel cells (DBFCs) have attracted a lot of attention. Since the electrooxidation of BH4- always accompanies the hydrolysis reaction, the energy density of DBFCs is closely related to the composition and structure of the anode. The formation of hydrogen formed by the hydrolysis of BH4- and the high exothermic nature of the reaction, as well as the strong basicity of the fuel, bring strict demands for the stability of the anode. Consequently, the designation and fabrication of an ideal anode are effective routes to enhance the performance of DBFCs. By comprehensive consideration of convenience, the electric/thermal conductivity of the electrode, the diffusion of the reactants/products and the effective cost, the electroless plating method was adopted and a CoB anode was directly formed on a Ni-foam substrate. The anode showed high electrocatalytic activities from electrooxidation of NaBH4 with a low CoB loading amount. Especially, the anode showed distinct stability compared to the CoB plate prepared by the pressed method and the catalytic activity could retain 65% after an accelerated life time test of 500 cyclic voltammetry cycles, which was due to the strong interactions between the CoB particles and Ni-foam substrate. Among all the investigated anodes, the CoB/Ni-foam electroless anode deposited for 7 times showed the best performance. It was applied in a membraneless DBFC which showed a maximum power density of 230 mW cm(-2) in 1 mol L-1 NaBH4 + 3 mol L-1 NaOH at 313 K. These characteristics allowed the electroless plating CoB/Ni-foam catalyst to exhibit enormous potential as an anode for practical applications in DBFCs.

A Simple and High Efficient Direct Borohydride Fuel Cell with Mno2-Catalyzed Cathode

A Direct Borohydride Fuel Cell Using MnO2-catalyzed Cathode and Hydrogen Storage Alloy Anode

A Highly Efficient and BH4−-tolerant Eu2O3-catalyzed Cathode for Direct Borohydride Fuel Cells

A Simple Direct Borohydride Fuel Cell with a Cobalt Phthalocyanine Catalyzed Cathode

Iron phthalocyanine as a cathode catalyst for a direct borohydride fuel cell

Anode Eelectrocatalysts and Reaction Mechanism for Direct Borohydride Fuel Cell

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Electrocatalysts for the Anodic Oxidation of Borohydrides

Anodic Oxidation of Alkali Borohydrides Catalyzed by Nickel

Hydrogen storage alloys as the anode materials of the direct borohydride fuel cell

Carbon Supported Silver Nanowires with Enhanced Catalytic Activity and Stability Used As A Cathode in A Direct Borohydride Fuel Cell

Study of the electrooxidation of borohydride on a directly formed CoB/Ni-foam electrode and its application in membraneless direct borohydride fuel cells

A Direct Borohydride Fuel Cell Using CoPc As Cathode Catalyst

Development and Characterization of a Quaternized Polymeric Anion Exchange Membrane Reinforced with Mg-Al-NO3− LDH for Direct Borohydride Fuel Cells

Ultrathin Veil-Like SnO2 Supported Co3O4 Nanoparticles for Direct Borohydride Fuel Cell Anode

The High Utilization of Fuel in Direct Borohydride Fuel Cells with a PdNix-B/carbon Nanotubes-Catalysed Anode

A Fuel Cell Development for Using Borohydrides As the Fuel

A Novel Anode for Direct Borohydride-Hydrogen Peroxide Fuel Cell: Au Nanoparticles Decorated 3D Self-Supported Reduced Graphene Oxide Foam

Engineering Partially Oxidized Gold via Oleylamine Modifier as a High-Performance Anode Catalyst in a Direct Borohydride Fuel Cell

Development of the direct borohydride fuel cell

Current status and progress of direct borohydride fuel cell technology development