Abstract:Hexagonal ferrites of M -type (in particular, BaFe 12 O 19 ) are magnetic materials with functional characteristics affected both by chemical composition and technology of their synthesis. We present the results of studying the magnetic and structural properties of BaFe 12 – x Cu x O 19 hexaferrites ( x = 0, 0.1, 0.2, 0.3, 0.4) obtained by hydrothermal synthesis with partial substitution of copper for iron. The composition of the synthesized samples was analyzed using X-ray diffraction, and the magnetic characteristics were measured using a vibration magnetometer. It has been revealed that the coercivity of the ferrite powders depends non-monotonically on the copper concentration and reaches the maximum (5629 Oe) and minimum (4698 Oe) values at x = 0 and x = 0.2. The presence of copper reduces the coercive force, but at the same time the values remain rather high compared to the results of similar studies. The saturation magnetization of the obtained ferrites gradually decreases (from 65.88 to 60.75 A · m 2 /kg at x = 0 and x = 0.4, respectively) with increasing. The distribution of Cu over ferrite sublattices was studied using Mössbauer spectroscopy. It is shown that in the hexaferrite structure, copper ions preferentially occupy 12 k and 4 f 1 sites. Hence, a decrease in the saturation magnetization with increasing x is most likely attributed to the presence of side non-magnetic phases observed on X-ray diffraction patterns. It is also revealed that during synthesis, copper participates in the formation of low-melting phases on the surface of hexaferrite grains which promotes agglomeration of the particles. Thus, the resulting powders can potentially be sintered at lower temperatures and, therefore, without a significant increase in the size of crystallites. Herewith, the coercivity retains its original high values. The results obtained can be used in developing ferrite permanent magnets with improved characteristics.

Hydrothermal Synthesis of Pure BaFe12O19 Hexaferrite Nanoplatelets under High Alkaline System

Synthesis and phase formation mechanism of alpha-Fe2O3 powders by hydrothermal reaction method

Effects of KOH and Temperature on Hydrothermal Synthesis of Α-Feooh Nanowire

Hydrothermal Synthesis of Magnetic Fe3O4 Hexagonal and Single Crystal Nanorods

Effect of poly sodium-p-styrenesulfonate on the phase formation and morphology of the hydrothermally synthesized bismuth ferrite powders

Solvothermal Synthesis and Magnetic Property of Monodispersed Fe_3O_4 Nano-powders

Hydrothermal Synthesis and Characterization of Uniform Α-Feooh Nanowires in High Yield

Synthesis and Magnetic Properties of Bafe12o19 Hexaferrite Nanoparticles by A Reverse Microemulsion Technique

Phase and Morphology Evolution of Bismuth Ferrites Via Hydrothermal Reaction Route

Effect of Stoichiometry on the Phase Formation and Magnetic Properties of Bafe12o19 Nanoparticles by Reverse Micelle Technique

Hydrothermal Synthesis, Photocatalytic and Magnetic Properties of Pure-Phase Bi2Fe4O9 Microstructures

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Improving the Magnetic Properties of Hydrothermally Synthesized Barium Ferrite

Synthesis and Magnetic Properties of Single-Crystalline BaFe12O19 Nanoparticles

Hydrothermal Synthesis and Characterization of Porous Hexagonal α-Fe2O3 Nanoparticles

Cost-effective integrated strategy for the fabrication of hard-magnet barium hexaferrite powders from low-grade barite ore

Hydrothermal Synthesis and Competitive Growth of Flake-Like M-type Strontium Hexaferrite.

Hydrothermal Synthesis of Single-Crystal Bismuth Ferrite Nanoflakes Assisted by Potassium Nitrate

Mineralizer-Assisted Hydrothermal Synthesis and Characterization of BiFeO<sub>3</sub> Nanoparticles

Α-Fe2o3: Hydrothermal Synthesis, Magnetic and Electrochemical Properties

Study of the magnetic and structural properties of BaFe12 – xCuxO19 ferrites obtained by hydrothermal synthesis