Abstract:The color of AlN/Si/Al coating can be controlled by the thickness of the AlN layer according to the interference effect. However, the loading capacity is affected by the large hardness difference between the Si and Al layers. Corrosion resistance is relatively weak due to penetration defects in the AlN surface layer. In this work, therefore, a SiN/AlSiN/AlN interlayer is sputtered in between the Si/Al layer in the AlN/Si/Al coating as the transition layer. The chemical state, structure, morphology, color, hardness, and corrosion resistance of the as-deposited Al-Si-N coating are carefully characterized using x-ray photoelectron spectrometry, grazing incident x-ray diffraction, atomic force microscopy, scanning electron microscope, colorimeter, nanoindentation, and electrochemical corrosion meter, respectively. To evaluate the long-term corrosion resistance, the uncoated, AlN/Si/Al-coated, and AlN/Si/SiN/AlSiN/AlN/Al-coated AZ31B Mg alloys are immersed in salt solution for different durations, followed by characterization of morphology and composition. The results show that the SiN/AlSiN/AlN interlayer is of a gradient structure in both composition and hardness. The AlN crystals grow continuously from the Al bonding layer into the AlSiN layer, resulting in internal longitudinal grain boundaries. The coating surface becomes smoother with a roughness (Rq) of 12.6 nm. The color of the coating is controlled by the AlN surface layer thickness. The coating hardness increases from 6.5 to 20.6 GPa. The corrosion current density of the coating decreases from 2.02 × 10−6 to 1.99 × 10−8 A/cm2. The coating could withstand corrosion in salt solution for at least 192h. The gradient structure of the interlayer effectively alleviates the hardness difference between the Si layer and the Al layer and inhibits the penetration of the corrosive medium from the surface. The mechanism for the enhanced corrosion resistance is explained through a model.

Improved Mechanical and Thermal Properties of Craln Coatings by Si Solid Solution

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Effect of Si-addition on structure and thermal stability of Ti-Al-N coatings

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Structure, corrosion, and tribological properties of CrSiN coatings with various Si contents in 3.5% NaCl solution

Structural, mechanical and corrosion behaviors of the homogeneous and gradient CrAlSiN coatings in 3.5% NaCl solution

Influence of the Addition of the Elements Ti and Cr on the Structure, and Mechanical and Tribological Properties of AlSiN Coatings

Structural, surface electronic bonding, optical, and mechanical features of sputtering deposited CrNiN coatings with Si and Al additives

Enhancement of hardness and corrosion resistance of Al-Si-N multilayer color coating via SiN/AlSiN/AlN compositional gradient interlayer

Microstructure and formation mechanism of the Si-Cr dual-alloyed coating prepared by pack-cementation

Microstructure Evolution and Wear Mechanism of Si-Effected Al0.6CoCrFeNi High-Entropy Alloy Coatings by Laser Cladding

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

Effect of annealing on the microstructure, mechanical and electrochemical properties of CrAlC coatings

Effects of silicon content on the structure and mechanical properties of (AlCrTaTiZr)–Six–N coatings by reactive RF magnetron sputtering

Enhanced mechanical properties and strengthening mechanism of Cu-Ni-Si alloy with trace chromium addition

Influence of Si and Ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings

Influence of annealing on microstructures and mechanical properties of arc-deposited AlCrTiSiN coating

Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS

Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN

Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Effect of Silicon Content on the Microstructure and Mechanical Properties of TiAlSiN Coatings Prepared by Reactive Magnetron Sputtering