Influence of blade wrap angle on internal flow and wear performance of solid-liquid two-phase centrifugal pump with semi-open impeller
Yanping Wang,Xiaofeng Deng,Mingliang Geng,Ruilin Tao,Yi Li,Zuchao Zhu
DOI: https://doi.org/10.1177/16878132241258827
IF: 2.1
2024-06-25
Advances in Mechanical Engineering
Abstract:Advances in Mechanical Engineering, Volume 16, Issue 6, June 2024. Blade wrap angle is one of the main parameters of centrifugal pump, which has an important influence on the internal flow characteristic and pump performance. In this work, five impeller models with different blade wrap angles (85°, 95°, 105°, 115°, and 125°) are established on the condition of other impeller parameters remain unchanged, whose external characteristic, internal flow, and wear were analyzed by numerical simulation method. The results show that the influence of blade wrap angle on efficiency is more significant than head, has a certain effect on the internal flow field of the centrifugal pumps and effects the wear position of pressure surface. With the increasing of blade wrap angle, the pump efficiency increases companied by the pump head decreases slightly, the area of higher speed at the outlet of the impeller tends to decrease, the higher speed wake area at the end of the blade pressure surface breaks and shrinks, the vortex in the impeller passage is fewer and smaller, the turbulent kinetic energy and morphology of vortex inside the pump decreases gradually, and the wear rate of the flow passage components shows a pattern of first decreasing and then increasing.
engineering, mechanical,thermodynamics