Abstract:Wet friction clutch is the key functional component of the high-speed helicopter variable-speed transmission system, which is used to change the power transmission path. In the engagement process of wet friction clutch, the driving/driven disc will produce drag torque under the shearing of lubricating oil, which reduces the transmission efficiency. This unnecessary drag torque reduces efficiency and increases clutch temperature. The temperature increase promotes the wear of gears and bearings and the aging deformation of friction plates, which leads to local wear and reduces the service life of the clutch. From the principle of wet friction clutch, the oil groove structure is directly related to the drag torque and the temperature rise of friction disc. It is very important for the long-distance flight and service life of high-speed helicopters to obtain the groove structure with low drag torque and low temperature rise. In order to solve this problem, taking the wet friction clutch of a high-speed helicopter as the research object, based on the radial and annular compound groove, the thermal-fluid-solid coupling simulation model of the wet friction clutch is established to obtained the flow characteristics and temperature field distribution of the lubricating oil in the friction disc oil groove, and to analyze the influence law of the oil groove structure parameters on the drag torque and temperature field. In order to improve the transmission efficiency and the service life of friction disc, Taguchi experiment and non-dominated neighborhood immune algorithm were used to optimize the structural parameters of the oil grooves. The comparison results show that the optimized structural can effectively reduce the drag torque and the temperature rise. This work can provide a theoretical reference for the structure design of a wet friction clutch.

Simulation and Experiment of Viscous Torque for Disengaged Wet Clutches of Tracked Vehicle

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Investigation on the transmission characteristics of hydroviscous drive

Modeling of the Drag Torque of the Disengaged Grooved Wet Clutches with Waviness

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Laminar Flow in the Gap Between Two Rotating Parallel Frictional Plates in Hydro-Viscous Drive

Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

Simulation and Experimental Study of Engagement Process with Groove Consideration

Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition

Drag torque prediction model of wet multi-disk shifting clutch

A methodology for image-based measurement of plate movement in disengaged wet clutches

Improving the Extricating Performance of Tbm Cutter-Head Driving System with Hydro-Viscous Clutch

Thermal-Fluid-Solid Coupling Simulation and Oil Groove Structure Optimization of Wet Friction Clutch for High-Speed Helicopter

An Experimental Investigation of Groove Control for Reducing Drag in a Flat Turbulent Boundary Layer

Adaptive torque control of wet dual clutch based on dynamic friction coefficient estimation

Analysis and Revision of Torque Formula for Hydro-viscous Clutch

Simulation and experiment for warp characteristic of wet multiple disc clutches

Influence of Groove Type on Friction Coefficient of Wet Friction Clutch Pair