Abstract:This article concerns partial slip contact problem of a composite medium half-space punched by a spherical indenter. The indenter is subjected to the normal indentation force, electric and magnetic loads, and then exerted by a progressively increasing tangential load. The tangential load, which is not sufficient to cause complete sliding, results in the contact region split into the slip region and the stick region. Coulomb friction law is adopted in the slip region and four possible physical cases are considered in view of the magneto electric properties of indenter. Three-dimensional (3D) magneto-electro-elastic coupling fields associated with four cases are obtained in terms of the elementary functions by use of the potential theory and ignoring effect of the tangential load on the generalized normal stresses in the contact region. The contact radius and the stick radius are determined by the equilibrium equations. The stress intensity factors are introduced to characterize the stress singularity. The obtained solutions are verified by comparing with results related to the frictionless contact problem and the fundamental solutions. Influence of the frictional coefficient and the magneto-electric properties of indenter on the physical quantities are analyzed. It is worth noting that the frictional coefficients have obvious effect on the von Mises stress and the maximum shear stress. The suitable electric and magnetic loads may eliminate the stress concentration. These results not only are the theoretical fundamental to the forthcoming indentation experiments and the fretting contact, but also serve as guiding design of the smart devices.

Numerical analysis of the influence of distributed inhomogeneities on tangential fretting

An Efficient Approximate Numerical Method for Modeling Contact of Materials with Distributed Inhomogeneities

Numerical Modeling Of Distributed Inhomogeneities And Their Effect On Rolling-Contact Fatigue Life

Parametric Study on Stressed Volume and Its Application to the Quantification of Rolling Contact Fatigue Performance of Heterogeneous Material

A Numerical Solution For Fretting Contacts

Numerical analysis of partial slip contact under a tangential force and a twisting moment

A Three-Dimensional Fretting Contact Model under Oblique Forces in Planetary Gear System

Efficient Numerical Modeling of Hertzian Line Contact for Material With Inhomogeneities

Two-dimensional Fretting Contact Analysis Considering Surface Effects

Partial Slip Contact Problem Between a Transversely Isotropic Half-Space of Multi-Ferroic Composite Medium and a Spherical Indenter

Contact of Transversely Isotropic Materials Containing Inhomogeneities

Numerical Method for Solving Contact Problems under Partial Slip Conditions

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials

Elastohydrodynamic Lubrication Analysis Of Point Contacts With Consideration Of Material Inhomogeneity

Modeling Tangential Contact Based on Non-Gaussian Rough Surfaces

Modelling Tangential Contact Problem with Surface Stress

Numerical Analysis for the Elastic Contact of Real Rough Surfaces

Numerical study of contacts between a flat-ended punch and a half-space embedded with inhomogeneities

A Thermoelastic Contact Model Between a Sliding Ball and a Stationary Half Space Distributed with Spherical Inhomogeneities

Fretting Dynamic Contact Analysis of Planetary Gear-Bearing Interference Fit Surface Considering Non-Uniform Interference

Finite element analysis of the contact forces between a viscoelastic sphere and rigid plane