Abstract:In this investigation the effect of various spatial hardness gradients (e.g. linear and nonlinear) on rolling contact fatigue (RCF) life are examined through a Mises-based plasticity framework. The plasticity framework, which utilizes kinematic hardening was embedded into a finite element (FE) model, which utilized continuum damage mechanics (CDM) to facilitate life calculations by simulating material deterioration as a function of cycle. CDM critical parameters – elastic damage law resistance stress (σr), elastic damage rate exponent (m), plastic damage law resistance stress (S0), plastic damage rate exponent (q) – were established from open literature experimental torsion stress-life data. A parametric study was then performed to quantify the relation between RCF life and (1) type of spatial gradient (e.g. linear, polynomial degree 4, polynomial degree 0.25), (2) depth of spatial gradient normalized with respect to half-contact width (e.g. 1b, 2.5b, 5b, 10b), (3) magnitude of residual stress, and (4) contact pressure. Additionally, FE simulations were conducted on non-graded, or uniform hardness microstructures and used to compare to the results from the parametric study. The RCF results indicated that polynomial gradients with degree greater than 1 outperform linear and polynomial gradients with degree less than 1, with differences between gradient types more apparent at shallower gradient depths. RCF resistance is improved with increasing gradient depth and increasing compressive residual stress. Regression analysis of the results from this investigation yielded a fatigue life expression that was formed as a function of the 4 input variables, with life improvement factors comparing well with experimental data from the open literature.

Parametric Study on Stressed Volume and Its Application to the Quantification of Rolling Contact Fatigue Performance of Heterogeneous Material

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Stochastic Fatigue Damage in Viscoelastic Materials Using Probabilistic Pseudo J-integral Paris' Law

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

Effect of spatial hardness distribution in rolling contact fatigue performance of bearing contacts

Study of the Plastic Behavior of Rough Bearing Surfaces Using a Half-Space Contact Model and the Fatigue Life Estimation According to the Fatemi–Socie Model

Numerical analysis of rolling contact fatigue crack initiation Considering material microstructure

Analysis of the Rolling Interface Contact Characteristics in Mixed Lubrication Based on Gaussian Distribution Theory

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Fatigue Analysis of Spherical Contact Subjected to Cyclic Elastic-Plastic Normal Loading

Research on Mixed Lubrication Problems of the Non-Gaussian Rough Textured Surface With the Influence of Stochastic Roughness in Consideration

A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces

A peridynamic study on the effects of surface topography on rolling contact fatigue

Comparison of Rolling Contact Fatigue Life Between Elastohydrodynamic Lubricated Point Contacts Pre and Post Running-in Treatment

Numerical Analysis for the Elastic Contact of Real Rough Surfaces

A fractal contact model of rough surfaces considering detailed multi-scale effects

A semi-analytical solution for inhomogeneous material in the quarter space

Three-Dimensional Parametric Finite-Volume Homogenization of Periodic Materials with Multi-Scale Structural Applications

Modeling the line contact on an elastic half-space with the statistical approach: Self-affine fractal roughness and numerical framework