Abstract:The dynamic characteristics of thin-walled four-point contact ball bearing with crown-type cage are important to the dynamic performance and motion accuracy of an industrial robot. Considering multi-clearances, dynamic contact and impact relationships of the ball, ring raceway and crown-type cage, a general methodology for dynamic simulation analysis of the bearing is investigated in the proposed work. In accordance with the geometry of torus, the geometric equation of accurate ring raceway is derived and integrated into the three-dimensional ring raceway using user's subroutines. The parameterized and assembled three-dimensional model of the bearing is established using ADAMS's macro-programs. Applying a penalty formulation and a unilateral nonlinear spring–damper model to the bearing, the internal contact interaction is represented as the compliant contact force model using IMPACT function. The multibody contact dynamic models of the bearing are solved by HHT algorithm with ADAMS/Solver. The dynamic results of the contact force, impact force and motion stability of the bearing are discussed under the condition of different loads. The static load distribution and cage's angular velocity of simulation model are verified by the theoretical values. The motion trajectory of outer ring's center is circular with a whirling motion. The sphere-to-partial torus surface contacts (ball–racetrack contact) are always four contact points in the load zone of the bearing. Applying pure radial load or rotating radial load, the impact force of ball-to-cage small pocket contact is much larger than that of radial and axial load combination in the non-load zone of the bearing. As a result of the large impact force of ball-to-cage small pocket contact, the angular velocities of the ball and cage are varying greatly in the non-load zone. The impact force of ball-to-cage big pocket contact is very small. The angular velocity of the ball is always that of pure rolling in the load zone and varying slightly in the non-load zone. The new method can be applied to investigate dynamic analysis and design of high-precision industrial robots with multi-clearances, multi-ball bearings under complex, time-varying working conditions.

A Dynamic Contact Wear Model of Ball Bearings Without or with Distributed Defects

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Modeling and simulation of wear for alignment mechanism of large aircraft component

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Dynamic modeling considering time-varying contact pairs and parameterized defects of deep groove ball bearings for its vibration characteristic analysis

Behaviour of an Angular Contact Ball Bearing with Three-Dimensional Cubic-Like Defect: A Comprehensive Non-Linear Dynamic Model for Predicting Vibration Response

Modeling of a deep-groove ball bearing with waviness defects in planar multibody system

Dynamic characteristics of high-speed angular contact ball bearings considering the coupling of outer race waviness and local defects

Multiple-degree-of-freedom dynamic model of rolling bearing with a localized surface defect

Dynamic modeling and abnormal contact analysis of rolling ball bearings with double half-inner rings

Modeling a non-ideal rolling ball bearing joint with localized defects in planar multibody systems

Dynamic behaviors of angular contact ball bearings based on nonlinear dynamic model with flexible ring and cage motion whirl

Multibody contact dynamics on mechanisms with deep groove ball bearing joints

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads

Dynamic modeling and force-vibration mapping mechanism construction of rolling bearings considering cage flexibility and local faults

A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation

Multibody dynamics simulation of thin-walled four-point contact ball bearing with interactions of balls, ring raceways and crown-type cage

Dynamic simulation of a cylindrical roller bearing with a local defect by combining finite element and lumped parameter models

Contact characteristic and vibration mechanism of rolling element bearing in the process of fault evolution