Abstract:The increasing demands for electrical vehicles and portable devices push us to explore novel energy storage systems with higher energy density as well as lower cost. Li-S battery, which utilizes sulfur as the cathode materials, is believed to be a promising candidate of the commonly used Li-ion batteries due to its high energy density (1675 mAh/g). Unfortunately, the poor electric conductivity of sulfur and the dissolution of the polysulfide cause low utilization efficiency of sulfur and fast capacity fade of the battery. To solve these problems and make the battery usable, sulfur is always combined with a conductive polymer such as PPy, CMK or a carbon matrix of CNTs or graphene. Graphene, as the basic unit for sp hybridized carbon materials, is considered as appealing carbon matrix to incorporate with sulfur for Li-S batteries. H2S is a kind of toxic gas which is urgently required to be removed effectively, while sulfur is the main element of H2S. Herein, we developed H2S as a novel and effective reducing agent for the reduction of graphene oxide, and a graphene/S hybrid can be prepared within the reduction process. The abundant oxygen groups attached on graphene oxide layers help oxidize the H2S and a homogeneous loading of S on the curly and interconnected graphene layers can be obtained as shown in Figure 1, such a structure ensures the contact between HRGO and S, which facilitates electron transfer when it is used as an electrode material. The resulting HRGO/S is further highlighted as a possible cathode of a Li-S battery, exhibiting good power performance and stability. A capacity of 683 mAh g can be retained at a current density of 2.0 A g, and a capacity of 490 mAh g can still be obtained even at 5.0 A g. The capacity retention is estimated to be about 72% (2.0 A g to 0.2 A g), which is far superior to that of a GN/S cathode (meltdiffusion of S with low-temperature thermally exfoliated graphene powder). It also shows relatively stable cyclic ability, and the capacity retention achieves 71% after 100 cycles with Coulombic efficiency around 94%, which is higher than those of the GN/S (65% retention after 50 cycles and a Coulombic efficiency around 88%) that may be because of the interaction between the S and the graphene surface derived from chemical reaction process in preparation.

Facile Synthesis of Highly Conductive Sulfur-Doped Reduced Graphene Oxide Sheets

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Reduced graphene oxide participation enabling fast nano-homogeneous deposition of sulfur for lithium–sulfur battery cathode

Reduced Graphene Oxide with Ultrahigh Conductivity As Carbon Coating Layer for High Performance Sulfur@Reduced Graphene Oxide Cathode

Synthesis of Pure Thiophene-Sulfur-Doped Graphene for an Oxygen Reduction Reaction with High Performance.

A Green and Mild Approach of Synthesis of Highly-Conductive Graphene Film by Zn Reduction of Exfoliated Graphite Oxide

Design and facile synthesis of defect-rich C-MoS2/rGO nanosheets for enhanced lithium-sulfur battery performance

Facile one-step hydrazine-assisted solvothermal synthesis of nitrogen-doped reduced graphene oxide: Reduction effect and mechanisms

Pure Thiophene-Sulfur Doped Reduced Graphene Oxide: Synthesis, Structure, and Electrical Properties.

Investigation on Fabrication of Reduced Graphene Oxide-Sulfur Composite Cathodes for Li-S Battery via Hydrothermal and Thermal Reduction Methods

Low-Cost Preparation of Graphene Papers from Chemical Reduction with Fei2/Ni2+ for Conductivity and Catalytic Property

Low Temperature Reduction of Free-Standing Graphene Oxide Papers with Metal Iodides for Ultrahigh Bulk Conductivity

Rapid Yet Efficient Reduction of Graphene Oxide Triggered by Semi‐Molten Metals

The Reduction of Graphene Oxide by H2s and Its Potential Application in Li-S Battery

Sulfonated Graphene Synthesized Via a Green Route and Its Capacitive Properties

Facile and rapid synthesis of RGO-In2S3 composites with enhanced cyclability and high capacity for lithium storage.

Boosting nitrogen-doping and controlling interlayer spacing in pre-reduced graphene oxides

Slurryless Li2S/reduced graphene oxide cathode paper for high-performance lithium sulfur battery.

A Facile Synthesis of Reduced Graphene Oxide with Zn Powder under Acidic Condition

Reduced Graphene Oxide-Wrapped FeS2 Composite as Anode for High-Performance Sodium-Ion Batteries

Two-dimensional Sulfur-Doped Mn3O4 Quantum Dots/reduced Graphene Oxide Nanosheets As High-Rate Anode Materials for Lithium Storage