Abstract:Along with the progress of electric vehicles and hybrid electric vehicles, high-performance lithium-ion batteries are needed urgently. Herein, we design and prepare a Fe2O3/MoS2/rGO composite in which the unique three-dimensional heterostructure effectively alleviates the volumetric change during charge/discharge processes and enhances the electronic conductivity of an active material, thus improving the reversible capacity of a battery. Under a low current density (200 mA g–1), Fe2O3/MoS2/rGO delivers a high discharge capacity of 906 mAh g–1 after 100 cycles. Even at a high current density (1000 mA g–1), the discharge capacity reaches 711 mAh g–1 after 500 cycles. In addition, Fe2O3/MoS2/rGO has also a good rate performance (608 mAh g–1 at 1500 mA g–1). The experimental results show that the synthesis of Fe2O3/MoS2/rGO is an effective approach to prepare anode materials that possess the outstanding electrochemical properties for lithium storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01709?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01709</a>.Experimental details and more experimental results, STEM image and the corresponding element mappings, CV profiles, charge/discharge curves, EIS patterns of the as-prepared electrode materials, SEM images of electrodes, and performance comparison of Fe2O3-based materials (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01709/suppl_file/an0c01709_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile and rapid synthesis of RGO-In2S3 composites with enhanced cyclability and high capacity for lithium storage.

In Situ Synthesis of CoS2/RGO Nanocomposites with Enhanced Electrode Performance for Lithium-Ion Batteries

In-situ Single-Step Chemical Synthesis of Graphene-Decorated CoFe2O4 Composite with Enhanced Li Ion Storage Behaviors

Rational In-Situ Construction of Three-Dimensional Reduced Graphene Oxide Supported Li2s/C Composite As Enhanced Cathode for Rechargeable Lithium-Sulfur Batteries

A Facile One-Pot Stepwise Hydrothermal Method for the Synthesis of 3D MoS2/RGO Composites with Improved Lithium Storage Properties

Composites of Reduced Graphene Oxide and Fe 2 O 3 Nanoparticles Anchored on MoS 2 Nanosheets for Lithium Storage

In Situ Reaction Synthesis of GeO2/RGO Nanocomposite for High Performance Lithium Storage

Li2s@C Composite Incorporated into 3d Reduced Graphene Oxide As A Cathode Material for Lithium-Sulfur Batteries

In situ reduction of WS 2 nanosheets for WS 2 /reduced graphene oxide composite with superior Li-ion storage

Facile preparation of CoSb2O6/rGO composite as the anode material of lithium-ion batteries

A Reduced Graphene Oxide/Cu6sn5 Nanocomposite With Enhanced Cycling Stability For Lithium Storage

LiMnO2@rGO Nanocomposites for High‐performance Lithium‐ion Battery Cathodes

Reduced graphene oxide participation enabling fast nano-homogeneous deposition of sulfur for lithium–sulfur battery cathode

Synthesis and characterization of LiMn0.8Fe0.2PO4/rGO/C for lithium-ion batteries via in-situ coating of Mn0.8Fe0.2C2O4·2H2O precursor with graphene oxide

Synthesis of porous-carbon@reduced graphene oxide with superior electrochemical behaviors for lithium-sulfur batteries

Enhanced Electrochemical Properties of γ‐MnS@rGO Composite as Anodes for Lithium‐Ion Batteries

Design and facile synthesis of defect-rich C-MoS2/rGO nanosheets for enhanced lithium-sulfur battery performance

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Reduced graphene oxide@nitrogen doped carbon with enhanced electrochemical performance in lithium ion batteries

In Situ Fabrication of Cos and Nis Nanomaterials Anchored on Reduced Graphene Oxide for Reversible Lithium Storage

Rapid Oxidation Synthesis of Hollow Cupric Oxide-Decorated rGO with High Performance and Kinetically Enhanced Lithium Storage