Abstract:The importance of amorphous and nanocrystalline Fe-based soft magnetic materials is increasing annually. Thus, characterisation of the chemical compositions, alloying additives, and crystal structures is significant for obtaining the appropriate functional properties. The purpose of this work is to present comparative studies on the influence of Nb (1, 2, 3 at.%) and Mo (1, 2, 3 at.%) in Fe substitution on the thermal stability, crystal structure, and magnetic properties of a rapidly quenched Fe79.4Co5Cu0.6B15 alloy. Additional heat treatments in a vacuum (260-640 °C) were performed for all samples based on the crystallisation kinetics. Substantial improvement in thermal stability was achieved with increasing Nb substitution, while this effect was less noticeable for Mo-containing alloys. The heat treatment optimisation process showed that the least lossy states (with a minimum value of coercivity below 10 A/m and high saturation induction up to 1.7 T) were the intermediate state of the relaxed amorphous state and the nanocomposite state of nanocrystals immersed in the amorphous matrix obtained by annealing in the temperature range of 340-360 °C for 20 min. Only for the alloy with the highest thermal stability (Nb = 3%), the α-Fe(Co) nanograin grows, without the co-participation of the hard magnetic Fe3B, in a relatively wide range of annealing temperatures up to 460 °C, where the second local minimum in coercivity and core power losses exists. For the remaining annealed alloys, due to lower thermal stability than the Nb = 3% alloy, the Fe3B phase starts to crystallise at lower annealing temperatures, making an essential contribution to magneto-crystalline anisotropy, thus the substantial increase in coercivity and induction saturation. The air-annealing process tested on the studied alloys for optimal annealing conditions has potential use for this type of material. Additionally, optimally annealed Mo-containing alloys are less lossy materials than Nb-containing alloys in a frequency range up to 400 kHz and magnetic induction up to 0.8 T.

Optimization of Rapidly Quenched Co–Zr and (co,fe)–zr Alloys for Rare Earth Free Permanent Magnets

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

High coercivity Pr2Fe14B/α-Fe nanocomposite permanent magnets with Zr addition

Revisiting Rare Earth Permanent Magnetic Alloys of Nd-Fe-C

Influence of Co substitution for Fe on the magnetic properties of nanocrystalline (Nd,Pr)-Fe-B based alloys

Performance improvement and element segregation behavior in Y substituted nanocrystalline (La,Ce)–Fe–B permanent magnetic alloys without critical RE elements

Effect of Zr Addition on the Magnetization Reversal Behavior for Α-Fe/pr2fe14b Nanocomposite Alloys

High-performance Nd-Fe-B Sintered Magnets Via Co-Doping High-Melting-point Zr and Low-Melting-point Dy71.5Fe28.5

Influence of Nb and Mo Substitution on the Structure and Magnetic Properties of a Rapidly Quenched Fe79.4Co5Cu0.6B15 Alloy

Study on neutron diffraction and correlated magnetic properties of (R1−xZrx)Fe12−yMoy with low Mo concentration

Preparation of FeCo-based amorphous alloys with excellent soft magnetism and high glass transition temperature

Rapidly solidified Nd7Fe67B22Mo 3Zr1 nanocomposite permanent magnets

Development of Nanocrystalline Multi-Component (Ce,La,Y)-Fe-B Alloys Without Critical Rare Earth Elements for Cost-Effective Permanent Magnets

Suppressing laves phase and overcoming magnetic properties tradeoff in nanostructured (Ce,La,Y)–Fe–B alloys via Ge substitution

Efficient co-diffusion of Tb and Co in a sintered Nd-Fe-B magnet by low-melting point alloys

Phase separation and chemistry evolution in Fe-rich Sm(CobalFe0.31Cu0.07Zr0.025)7.7 magnets: The effect of initial defect

Rapid coercivity increment of Nd–Fe–B sintered magnets by Dy69Ni31 grain boundary restructuring

High Magnetic Performance of Cobalt Ferrite and Anomalous Magnetizing Behavior of Cofe2/Oxide Derived from Ferrite

Improvement of Corrosion Resistance and Magnetic Properties of FeCoNiAl0.2Si0.2 High Entropy Alloy Via Rapid-Solidification

Nd-Fe-B Sintered Magnets with Low Rare Earth Content Fabricated Via Dy71.5Fe28.5 Grain Boundary Restructuring