Abstract:To improve the hydrogen precipitation performance on the surface of the catalytic layer of the proton exchange membrane (PEM) hydrogen cathode, ultrasonic vibration was employed to accelerate the detachment of hydrogen bubbles on the surface of the catalytic layer. Based on the energy and mechanical analyses of nano and microbubbles, the hydrogen bubble generation mechanism and the effect of temperature on bubble parameters during the evolution process when the ultrasonic field is coupled with the electric field are investigated. The nucleation frequency of the hydrogen bubbles, the relationship between the pressure and temperature and the operating temperature during the generation and detachment of bubbles as well as the detachment radius of bubbles under the action of the ultrasonic field are obtained. The effects of ultrasound and temperature on hydrogen production were verified by visual experiments. The results show that the operating temperature affects the nucleation, growth, and detachment processes of hydrogen bubbles. The effect of temperature on the nucleation frequency of bubbles mainly comes from the Gibbs free energy required for the electrolysis reaction. The bubble radius and growth rate are both related to the temperature to the power of one-third. Ultrasonic waves enhance the separation of hydrogen bubbles from the catalyst surface by acoustic cavitation and impact effects. An increase in the working temperature reduces the activation energy barriers to be overcome for the electrolysis reaction of water, which together with a decrease in the Gibbs free energy and the surface tension coefficient, leads to an increase in the nucleation frequency of the catalytic layer and a decrease in the radius of bubble detachment, and thus improves the hydrogen precipitation performance. Visualization experiments show that in actual PEM hydrogen production, ultrasonic intensification can promote the formation of nucleation sites. The ultrasonic induced fine bubble flow not only has a drag effect on the bubble, but also intensifies the polymerization growth of the bubble due to the impact of the fine bubble flow, thus speeding up the detachment of the bubble, shortening the covering time of the hydrogen bubble on the surface of the catalytic electrode, reducing the activation voltage loss and improve the hydrogen production efficiency of PEM. The experimental results show that when the electrolyte is 60°C, the maximum hydrogen production efficiency of ultrasound is increased by 7.34%, and the average hydrogen production efficiency is increased by 5.83%.

Effect of ultrasonic vibration induced by PZT during water electrolysis

Experimental and Numerical Investigation of the Impact of Operating Conditions on Water Electrolysis with Ultrasonic

The Influence Of Water Characteristics On Plasma-Containing Bubble Dynamics

Temperature impacts on the growth of hydrogen bubbles during ultrasonic vibration-enhanced hydrogen generation

Study on the influence of ultrasound on the kinetic behaviour of hydrogen bubbles produced by proton exchange membrane electrolysis with water

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Ultrasonication to reduce particulate matter generated from bursting bubbles: A case study on zinc electrolysis

Insight into Ph-Controlled Bubble Dynamics on a Pt Electrode During Electrochemical Water Splitting

In-situ Investigation of Bubble Dynamics and Two-Phase Flow in Proton Exchange Membrane Electrolyzer Cells

Mechanism of pH Effect on Mass Transfer During Bubble Evolution on Photoelectrode Surfaces

Effect of Electrolyte Ph on Oxygen Bubble Behavior in Photoelectrochemical Water Splitting

Hydrogen bubble evolution and gas transport mechanism on a microelectrode determined by cathodic potential and temperature

Impact of gas bubble slug on high-frequency resistance and cell voltage in water electrolysis device

Strain Rate and Porosity Effect on Mechanical Characteristics and Depolarization of Porous Poled PZT95/5 Ceramics

Effect of Electrolyte Concentration on Bubble Evolution and Mass Transfer Characteristics in Photoelectrochemical Water Splitting

Coalescence induced late departure of bubbles improves water electrolysis efficiency

Oxygen vacancy engineering of zinc oxide for boosting piezo-electrocatalytic hydrogen evolution

Performance enhancement of electrocatalytic hydrogen evolution through coalescence-induced bubble dynamics

Electrolyte spraying within H$_2$ bubbles during water electrolysis

Gas-water Two-Phase Discharge Phenomenon in PEF Chamber for Water Treatment

The effect of buoyancy driven convection on the growth and dissolution of bubbles on electrodes