Abstract:ZrB2-SiC ceramics and Nb alloy were brazed at 1160 degrees C for 60 min with CoFeNiCrCuTix high-entropy alloy filler. The influence of Ti content on the interface structure and mechanical properties of ZrB2-SiC/Nb joint was systematically studied. It is found that the rich-Ti Laves phase was formed due to the addition of large atomic size Ti fill into the filler alloy or brazing joint, and its content increases with Ti content. The joint brazed by high-entropy alloys filler without Ti can be divided into a tooth-shaped Cr2B reaction layer and a central area composed of a eutectic mixed structure of FCC phase and rich-Nb lamellar Laves phase. Ti and Nb are mutual solid solution elements. The increase of Ti content in the joint makes the FCC phase and the rich-Nb lamellar Laves phase to transform into a big bulk Ti-rich Laves phase and the quadrilateral (Ti, Nb)B phase. The tooth-shaped Cr2B was disappeared. The residual stress generated in the joint during the brazing process tends to cause defects such as holes and microcracks in the bulk Ti-rich brittle Laves phase. Therefore, with the addition of Ti, the normal temperature performance of the joint decreases from 216 MPa to 52 MPa. However, with the increase of Ti, the high-temperature mechanical properties of the joint first decrease, and then increase. It was mainly due to the formation of rich-Ti Laves phase and quadrilateral (Ti, Nb)B with excellent high-temperature mechanical properties. When brazing with CoFeNiCrCuTi1.5 filler, the high-temperature performance of the joint reached 92% of its room temperature performance.

Interfacial Microstructure and Properties of In-situ TiB Reinforced ZrB2-SiC Joints

Microstructure and mechanical properties of ZrB2-SiC joints fabricated by a contact-reactive brazing technique with Ti and Ni interlayers

Microstructural evolution and growth behavior of in situ TiB whisker array in ZrB2- SiC/Ti6Al4V brazing joints

Microstructural Evolution and Mechanical Properties of Zrb2-Sic/Cu/Ti/Ti6al4v Brazing Joints

Microstructure and Mechanical Properties of ZrB2–SiC Ultrahigh Temperature Ceramic Composite Joint Using TiZrNiCu Filler Metal

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy

Microstructural Evolution and Growth/degradation Behavior of in Situ TiB Whiskers in ZrB2-SiC Joints Using Ti/Ni/Ti Filler

Brazing ZrB2-SiC Ceramics to Ti6Al4V Alloy with TiCu-based Amorphous Filler

Interfacial Structure and Fracture Behavior of TiB Whisker-Reinforced C/SiC Composite and TiAl Joints Brazed with Ti–Ni–B Brazing Alloy

Microstructural Investigation of in Situ TiB Whiskers Array Reinforced ZrB2–SiC Joint

Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with AgZr active filler metal

Microstructure and Mechanical Property of the Zrb2-Based Ultra-High-Temperature Ceramic Composites Brazed Joint

Microstructure Evolution and Mechanical Property of ZrC-SiC/Ti6Al4V Joints Brazed Using Ti-15Cu-15Ni Filler

Understanding the Microstructure Evolution Mechanism and the Microstructure-Strength Correlations of Ti3SiC2/Ti2AlNb Joint Brazed with AgCu Interlayer

Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2-Ni-B brazing powder

Microstructure and mechanical properties of ZrB2-SiC ceramic composite brazed joint

Interfacial Microstructure and Mechanical Properties of ZrB2SiC C Ceramic and GH99 Superalloy Joints Brazed with a Ti-modified FeCoNiCrCu High-Entropy Alloy

Microstructure and Mechanical Properties of ZrB2‐SiC/Nb Joints Brazed with CoFeNiCrCuTix High‐entropy Alloy Filler

Brazing of ZrB2–SiC–C and GH99 with AgCuTi/SiC Interpenetrating Network Structural Composite As an Interlayer

Effect of brazing temperature on interfacial microstructure and mechanical property of Ti60/AgCu/ZrO2 joint

Microstructure and Shear Strength of ZrB2-SiC/Ti-6Al-4V Joint by TiCuZrNi with Cu Foam