Abstract:Static globularization of titanium alloys is a complicated microstructure evolution which is influenced by multi-factor. The globularization fraction presents trend of increasing with the increasing heat treatment time, especially in the beginning of heat treatment. In this stage, the globularization process is controlled by boundary splitting. Boundary splitting is a transformation process of crystal orientation from low-angle boundary to high-angle boundary, finally to separation. The same particle may present the different crystal orientation, indicating that the formation of misorientation inside particle. Euler angles are used to calculated the changes of crystal orientation. The Schmid factor indicates that basal slip {0001}<11–20> or pyramidal slip {1–101}<11–20> is easy to activate in contrast to prismatic slip {1–100}<11–20>. In the mid and later stages of heat treatment, the globularization process is influenced by microstructure coarsening, and the globularization rate slows down. Microstructure coarsening, controlled by element diffusion, is a slow process influenced by temperature, time and microstructure morphology. In order to model the process of static globularization, the modified model coupling prestrain and heat treatment time is developed by introducing the parameter t0.5, i.e. the time required for completing 50% globularization fraction, in the framework of the JMAK model. In the obtained model, strain prior to heat treatment is first considered to establish kinetics equations of static globularization of titanium alloys. The linear relationship between ln(ln(1/(1-f))) and lnεt is found by a set of theoretical deduction, in which f, ε and t denote static globularization fraction, prestrain and heat treatment time, respectively. Static globularization fractions of Ti-17 and Ti-6Al-4V alloys at different temperature are predicted based on the established model. Predictions of static globularization fraction are in good agreement with the experimental results.

Thermo-kinetic Modeling for the Growth/Dissolution of Globes and Lamella in Ti-55531 Under Continuous Heating Condition

Effect of Α Morphology on the Diffusional Β ↔ Α Transformation in Ti–55531 During Continuous Heating: Dissection by Dilatometer Test, Microstructure Observation and Calculation

Dynamic Globularization Kinetics and Finite Element Analysis for the Hot Working of Ti-5Al-5Mo-5V-3Cr-1Zr with Initial Lamellar Microstructure

Primary Dendrite Growth Kinetics and Rapid Solidification Mechanism of Highly Undercooled Ti-Al Alloys

Analysis of Globularization Modeling and Mechanisms of Alpha/beta Titanium Alloy

Combined Effects of High Undercooling and Large Cooling Rate on the Microstructure Evolution and Hardening Mechanism of Rapidly Solidified Ti-Al Alloys

Modeling of the Precipitation Kinetics and Morphology Evolution of Lamellar Α in Ti-alloys During Non-Isothermal Treatments

Microstructural Modeling of the Α + Β Phase in Ti-6Al-4V: A Diffusion-Based Approach

On the Modeling of Diffusion-Controlled Growth of Primary Alpha in Heat Treatment of Two-Phase Ti-alloys

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Coarsening Kinetics and Morphological Evolution in a Two-Phase Titanium Alloy During Heat Treatment

Cooling Rate Effects on Microstructure and Diffusion Behaviour in Ti65 Alloy: Insights from a Modified Diffusion Model

Characterization of Hot Deformation Microstructure of a Near Beta Titanium Alloy Ti-5553

Exploring the Phase Transformation in Β -Quenched Ti-55531 Alloy During Continuous Heating Via Dilatometric Measurement, Microstructure Characterization, and Diffusion Analysis

Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in region

Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region

In-situ observation microstructure evolution and growth kinetics of lamellar γ phases in Ti44Al alloy during heat treatment

Nucleation and growth mechanism of α-lamellae of Ti alloy TA15 cooling from an α + β phase field

Characterization Of Microstructural Evolution For A Near-Alpha Titanium Alloy With Different Initial Lamellar Microstructures

Isothermal Kinetics of Β ↔ Α Transformation in Ti-55531 Alloy Influenced by Phase Composition and Microstructure

Constitutive Model and Microstructure Evolution of Ti65 Titanium Alloy