High-performance transparent film heater with an embedded Ni metal-mesh based on selected metal electrodeposition process

Yanhua Liu,Su Shen,LinSen Chen,Yun Zhou,Yan Ye,Yanyan Wang,Wen Qiao,Wenbin Huang

DOI: https://doi.org/10.1117/12.2245975

2016-01-01

Abstract:An ultra-flexible and low-sheet resistance transparent conductive film is developed from nickel metal-mesh (Ni metal-mesh)embedded in a polyimide (PI) by exploiting selective deposition technique coupled with photolithography and subsequent inverted film-processing method. The fabricated conductive film achieved sheet resistance values as low as 0.15 Omega sq(-1), with corresponding optical transmittance as 80% at 550 nm corresponding the figure of merit up to 1.1x10(4). The film shows excellent adhesion and also preserves its structural integrity and good contact with the substrate for severe bending showing less than 4% decrease of conductivity even after 104 cycles. Finally, employing the fabricated Ni metal-mesh/PI conductive film, a hybrid transparent thin-film heater is demonstrated, which exhibited higher heating temperatures (110 degrees C) under the lower operating voltage (1 V), lower power consumption (79.1 degrees C cm(2) W-1), and shorter response time (T < 2 s) than other heaters, as well as stability after repeated test.