Abstract:Among solid-state lighting technology, phosphor-converted white light-emitting diodes (pc-WLEDs) are excellent candidates to replace incandescent lamps for their merit of high energy conservation, long lifetime, high luminous efficiency as well as polarized emissions. Semiconductor quantum dots (QDs) are emerging color tunable emissive light converters. They have shown significant promise as light emitters, as solar cells, and in biological imaging. It has been demonstrated that the pc-WLED devices integrated with red emissive ZnCdSe QDs show improved color rendering index of device. However, cadmium-based QDs have limited future owing to the well-known toxicity. Recently, non-cadmium luminescence materials, i.e. CuInS2-based QDs, are investigated as desirable low toxic alternatives. Particularly, CuInS2-based QDs exhibit very broad emissions spectra with full width at half maximum (FWHM) of 100-120 nm, large Stokes shifts of 200~300 meV and finely-tunable emissions. In order to adjust emission wavelengths and improved quantum yield (QY), CuInS2/ZnS (CIS/ZnS) core/shell structure was introduced. Therefore, CIS/ZnS QDs have been extensively investigated and be used as color converter in solid-state lighting. Synthesis and application of CuInS2/ZnS core/shell QDs are conducted using a hot injection route. CIS/ZnS core/shell QDs with molar ratio of Cu:In equal to 1:4 are prepared. For WLED fabrication, the CIS/ZnS QD is dispersed in toluene first, and then it is blended with transparent acrylic-based UV resin. Subsequently, the commercial green-emitting Lu3Al5O12: Ce3+ (LuAG) phosphors are mixed with QDs-resin mixture. After that, the QDs-phosphors-resin mixtures are put in the oven at 140 °C for 1 h to evaporate the toluene. Subsequently, the homogeneous QDs-phosphors-resin mixture is dropped on the top of a blue LED chip (InGaN). Then, the device is cured by 400 W UV light to form WLED. The emission wavelength of CIS/ZnS QD exhibits yellow region of 552 nm with QY of 76 %, and with relatively broad bandwidth of 86 nm. The structure of CIS/ZnS belongs to chalcopyrite phase and its average particle size is 3.2 nm. The luminous efficacy, color rendering index (CRI), correlated color temperature (CCT), and CIE chromaticity coordinate of WLED is 47 lm/W, 89, 5661 K, and (0.33, 0.29), respectively.

One-pot Synthesis of Water-Soluble Cu–In–Zn–S/ZnS Core/shell Quantum Dots for Efficient White Light-Emitting Devices

An Efficient Green-Emitting Quantum Dot with Near-Unity Quantum Yield and Suppressed Auger Recombination for High-Performance Light-Emitting Diodes

Fabrication of CuInS2/ZnS quantum dots-based white light-emitting diodes with high color rendering index

Highly efficient Cu-In-Zn-S/ZnS/PVP composites based white light-emitting diodes by surface modulation

Aqueous Synthesis of 79% Efficient AgInGaS/ZnS Quantum Dots for Extremely High Color Rendering White Light-Emitting Diodes

Single-Phase Cu,Mn-Codoped ZnGaS/ZnS Quantum Dots for Full-Spectrum White-Light-Emitting Diodes

Low temperature synthesis of highly bright green emission CuInS2/ZnS quantum dots and its application in light-emitting diodes

Highly Efficient and Stable CdZnSeS/ZnSeS Quantum Dots for Application in White Light-Emitting Diode

WITHDRAWN: Low temperature synthesis of highly bright green emission CuInS2/ZnS quantum dots and its application in light-emitting diodes

Scalable synthesis of organic-soluble carbon quantum dots: superior optical properties in solvents, solids, and LEDs.

High-efficiency, deep blue ZnCdS/CdxZn1-xS/ZnS quantum-dot-light-emitting devices with an EQE exceeding 18

Synthesis of highly fluorescent InP/ZnS small-core/thick-shell tetrahedral-shaped quantum dots for blue light-emitting diodes

Controllable Synthesis of Cu-based quantum dots/nanocrystals and Application in White Light-Emitting Diodes

Preparation of Quantum Dot Light-emitting Diodes Based on the Quantum Dots-CBP Hybrid

Emission Tuning of Highly Efficient Quaternary Ag-Cu-Ga-Se/ZnSe Quantum Dots for White Light-Emitting Diodes.

Highly Luminescent Copper Gallium Selenium Based Multicomponent Quantum Dots: Formation Process and Tunable White-Light Emission

High quantum-yield CdSexS1-x/ZnS core/shell quantum dots for warm white light-emitting diodes with good color rendering.

Enhancement of Two-Photon Fluorescence and Low Threshold Amplification of Spontaneous Emission of Zn-processed CuInS2 Quantum Dots

White light-emitting quantum dot diodes and tuning of luminescence processes

Microwave-Assisted Aqueous Synthesis of Transition Metal Ions Doped Znse/Zns Core/Shell Quantum Dots with Tunable White-Light Emission

One-Pot Synthesis of Orange Emissive Carbon Quantum Dots for All-Type High Color Rendering Index White Light-Emitting Diodes