Abstract:Erosion caused by solid particles in pipe bends is one of the major concerns in the oil and gas industry which may result in equipment malfunction and even failure. In this work, a two-way coupled Eulerian–Lagrangian approach is employed to solve the liquid–solid flow in the pipe bend. Five different erosion models and two particle-wall rebound models are combined to predict the erosion rate. The most accurate model is chosen to calculate the effects of a range of parameters on erosion after comparing the predicted results with the experimental data. Further, the relationship between the Stokes number and the maximum erosion location is also assessed. It is found that although all these erosion models generate qualitatively similar erosion patterns, the Erosion/Corrosion Research Center (E/CRC) erosion model with the Grant and Tabakoff particle-wall rebound model produces results that are closest to the experimental data. Sequence of the influence of different parameters on erosion from the highest to the lowest is obtained: pipe diameter, inlet velocity, bending angle, particle mass flow, particle diameter, and Mean Curvature Radius/Pipe Diameter (R/D) ratio and bend orientation. Additionally, the relationship between Stokes number and the dynamic movement of the maximum erosion location is presented which can be used to predict the maximum erosion location for different operating conditions. Three collision mechanisms are proposed to explain how the changes of Stokes numbers influence the erosion location.

Mathematical Modeling of Stokes Flow in Petal Shaped Pipes

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Modeling of Surface Roughness Effects on Stokes Flow in Circular Pipes

Analytical Solution for the Viscous Flow of Small Reynolds Numbers in Rough Pipes

Development of Pipeline Transient Mixed Flow Model with Smoothed Particle Hydrodynamics Based on Preissmann Slot Method

Mathematic Model of Laminarbubbly Flow

Modeling of low Mach number unsteady turbulent pipe flows

Numerical Simulation of Solid Particle Erosion in Pipe Bends for Liquid–solid Flow

Stochastic modeling and large-eddy simulation of heated concentric coaxial pipe flow

A Geometrically-Exact Momentum-Based Nonlinear Theory for Pipes Conveying Fluid

A model for unsteady mixed flows in non uniform closed water pipes and a well-balanced finite volume scheme

Hydrodynamic Modeling of Oil–Water Stratified Smooth Two-Phase Turbulent Flow in Horizontal Circular Pipes

Numerical Modeling of Flow and Hydrodynamic Forces around a Piggyback Pipeline near the Seabed

Theoretical study on Poiseuille flow of thixotropic yield stress fluids: an exact solution

Modified Partially Averaged Navier–Stokes Model for Turbulent Flow in Passages with Large Curvature

Mathematical model of small diameter condenser pipes

Analytical models for pressure-driven Stokes flow through superhydrophobic and liquid infused tubes and annular pipes

A Nonlinear Partially-Averaged Navier–Stokes Model for Turbulence

Analytical models for pressure-driven Stokes flow through superhydrophobic and liquid-infused tubes and annular pipes

Research of Applicability of Several Turbulence Models in Numerical Simulation for Flow in Pipeline

Micro circular pipe flow mathematical model considering the effect of Van der Waals force