Abstract:In order to solve the problem of support crushing, rib spalling, and partial roof fall in working face crossing fault structure area, taking II1023 working face of Haizi Mine as the engineering background, the numerical simulation, theoretical analysis, and field measurement were used to simulate the rock activity law in the process of working face crossing fault. Based on this, the mechanical model of the interaction between the support and the surrounding rock in the fault area was established, and the calculation formula of the support strength required by the support under different equilibrium criteria was deduced, which provides a basis for the reasonable selection of hydraulic support. The results show that the rock stress of the working face passing through the fault zone is divided into high-stress section when it is gradually close to the fault and low-stress section after passing through the fault. In the high-stress section, the rock stress increases in front of the working face, and the distribution form is similar to the stress distribution of the narrow coal pillar. The roof easily forms a long hanging roof and slip along the fault surface, which is prone to rib spalling and partial roof fall and support crushing. The support strength is mainly related to fault dip angle, fault cohesion, support beam length, length of the main roof rock beam, and the distance between working face and fault. The reasonable support strength should be determined by the calculation results under different equilibrium criteria. When the working face advances in the high-stress section, the required support strength of the support increases with the increase of the fault dip angle and the length of the main roof rock beam and decreases with the increase of the fault cohesion, the length of support beam, and the distance between working face and fault. With the increase of the fault dip angle, the form of rotary instability changes and the probability increases. The field practice shows that during the fault crossing of the II1023 working face, the working resistance of the support shows the characteristics of high-pressure area and low-pressure area, but it does not exceed the rated working resistance of the selected support. The fully mechanized coal face passed through the fault area safely, and there were no accidents such as support crushing, rib spalling, and partial roof fall.

FAILURE CHARACTERISTICS AND STRENGTH MODEL OF COMPOSITE ROCK SAMPLES IN CONTACT ZONE UNDER COMPRESSION

Experimental Study on the Anisotropy of Layered Rock Mass under Triaxial Conditions

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface

Study on Coordinated Deformation Failure Mechanism and Strength Prediction Model of Rock-lining Concrete

Experimental Study on Mechanical Properties and Energy Evolution Law of Coal-Rock Composite Structure under Different Interface Connection Modes

Compression Mechanical Properties and Constitutive Model for Soft–Hard Interlayered Rock Mass

Compression failure conditions of concrete-granite combined body with different roughness interface

Experimental Study on Uniaxial Compression Failure Characteristics and Mechanical Properties of Composite Aquiclude Rock

Similar simulation test of the mechanical properties of layered composite rock mass

Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression

Mechanical behaviour and failure characteristics of rocks with composite defects of different angle fissures around hole

The strength characteristics and competitive failure mechanism of primary coal-rock combination considering interface damage quantity

Influence of Rock Strength on the Mechanical Characteristics and Energy Evolution Law of Gypsum–Rock Combination Specimen under Cyclic Loading–Unloading Condition

Experimental and numerical simulation of loading rate effects on failure and strain energy characteristics of coal-rock composite samples

The failure behavior of coal-rock combined body under compression-shear loading

Deformation and Failure Mechanism of Surrounding Rock in Deep Soft Rock Tunnels Considering Rock Rheology and Different Strength Criteria

STUDY OF ROCK UNIAXIAL COMPRESSION DEFORMATION AND FAILURE CHARACTER BASED ON AN IMPROVED WEIBULL DISTRIBUTION MODEL

Experimental Study of Mechanical Properties and Failure Characteristics of Coal–Rock-like Composite Based on 3D Printing Technology

Research on Interaction Relationship between Support and Surrounding Rock in Fault Structural Area and Its Application

Tensile Bearing Performance and Mechanical Transfer Mechanism of Coal-Rock Composite Anchor Bodies Under Different Height Ratios of Rock to Coal