Abstract:The recycling of spent lithium-ion batteries has become an urgent imperative. In recent years, the rising demand for lithium has sparked interest in the selective extraction of lithium from spent LIBs cathode materials. This process is of interest as it can streamline processes, improve lithium recovery efficiency, and reduce processing costs. Electrochemical methods for selectively extracting lithium from spent cathode materials have gained significant attention among various selective extraction methods due to their advantages, such as low energy consumption and environmental friendliness. Despite substantial progress in improving the efficiency of lithium recovery through electrochemical methods, the economic returns from lithium salt products, to some extent, are still insufficient to offset the processing costs of the entire process, thereby limiting the further development of this technology. Therefore, it is necessary to develop reasonable strategies for the utilization of such de-lithiated materials to further enhance product yields. One promising strategy among these approaches is direct regeneration of fresh cathode materials from the de-lithiated material. However, due to a lack of clear understanding of the structural evolution of transition metal oxides during the lithium extraction process, and the lithiation mechanisms of lithium-depleted materials, there is currently no research report on the direct regeneration of such de-lithiated materials into battery materials. Herein, an electrochemical method using LiCl aqueous as electrolyte is developed to realize the selective extraction of lithium from spent polycrystal LiNi 0.55 Co 0.15 Mn 0.3 O 2 (NCM) cathode materials, with a maximum de-lithiation rate approaching 90%. Thorough characterizations were conducted to monitor the morphological, structural, and compositional evolution of NCM during the electrochemical de-lithiation process. These findings contribute to a profound understanding of the characteristics of the de-lithiated material and inform the rational design of regeneration pathways tailored to such materials. The results reveal that the deep de-lithiation of NCM in lithium-aqueous electrolyte triggers water-molecule intercalation, leading to an unusual phase transformation beyond H1→H2→H3. This phase transformation causes substantial lattice expansion along c-axis and introduces severe lattice distortion in de-lithiated material. The over-expanded lattice and the presence of bulk defects resulted in an unstable structure, posing huge challenge for the subsequent direct regeneration of de-lithiated material using conventional calcination methods. To address this, we employ a hydrothermal re-lithiation process, characterized by a milder, lithium-rich and water-based environment. This process is able to create a "lithium-water-balance" structure for de-lithiated materials by promoting the lithium diffusion into the lithium-deficiency structure and facilitating the exchange between lithium ions and water molecules. This process effectively enhances structural stability of the de-lithiated material. As a result, subsequent calcination successfully converts the degraded structure back into the original lithium-conductive layer structure by further eliminating the remaining lattice defects in material and promoting the cation rearrangement. The regenerated material exhibits decent electrochemical performances, which delivers a capacity of 153.2 mAh g −1 at 1C and 132.5 mAh g − 1 at 5C. This work provides insights into the electrochemical de-lithiation method and fills a gap in the utilization of de-lithiated NCM, paving the way for the sustainable recycling of spent LIBs.

Electrochemical Relithiation for Direct Regeneration of LiCoO2 Materials from Spent Lithium-Ion Battery Electrodes

Rapid, Direct Regeneration of Spent LiCoO2 Cathodes for Li-Ion Batteries

Solid-State Direct Regeneration of Spent Lithium Cobalt Oxide Cathodes for Li-Ion Batteries

The auto-oxidative relithiation of spent cathode materials at low temperature environment for efficient and sustainable regeneration

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration

Direct recovery of LiCoO2 from the recycled lithium-ion batteries via structure restoration

Toward High Voltage Performance of LiCoO 2 Cathode Materials Directly Regenerated with a Bulk and Surface Synergistic Approach from Spent Lithium-Ion Batteries

Efficient Direct Regeneration of Spent LiCoO2 Cathode Materials by Oxidative Hydrothermal Solution

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Waste to Treasure: Regeneration of Porous Co-Based Catalysts from Spent LiCoO 2 Cathode Materials for an Efficient Oxygen Evolution Reaction

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Waste to Treasure: Regeneration of Porous Co-Based Catalysts from Spent LiCoO2 Cathode Materials for an Efficient Oxygen Evolution Reaction

Direct Regeneration of Spent Li-Ion Battery Cathodes via Chemical Relithiation Reaction

Sustainable regenerating of high-voltage performance LiCoO2 from spent lithium-ion batteries by interface engineering

Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode from Spent Lithium-Ion Batteries by the Molten Salts Method

Efficient Extraction of Lithium from Anode for Direct Regeneration of Cathode Materials of Spent Li-Ion Batteries

Direct Regenerating Cathode Materials from Spent Lithium‐Ion Batteries

Sustainable regeneration of high-performance LiCoO2 from completely failed lithium-ion batteries

Sustainable Electrochemical Recycling of Spent Lithium-Ion Batteries: Selective Extraction of Lithium and Direct Regeneration of De-Lithiated Material

Direct regeneration of spent cathode materials by deep eutectic solvent

Collaborative Regeneration of Structural Evolution for High-Performance of LiCoO 2 Materials from Spent Lithium-Ion Batteries