Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Dynamic Tensile Strength and Failure Mechanisms of Thermally Treated Sandstone under Dry and Water-Saturated Conditions

Water saturation effects on dynamic behavior and microstructure damage of sandstone: Phenomena and mechanisms

Dynamic Splitting Experimental Study on Sandstone at Actual High Temperatures under Different Loading Rates

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Assessments of Tensile Characteristics and Degradation Mechanism of Sandstone Subjected to Wetting–Drying Cyclic Treatment

Damage of Sandstone Induced by Repetitive Impact Loading

Direct tensile mechanical properties and damage fracture mechanisms of thermally damaged coal measures sandstone under high strain rate loading

Influence of multiple porous structure evolution on physical–mechanical properties and damage mechanism of sandstone heated continuously/periodically with the identical heating time

THERMAL DAMAGE OF SANDSTONE AND ACOUSTIC EMISSION BASED ON BRAZILIAN SPLITTING TEST

Tensile mechanical behavior and fracture characteristics of sandstone exposed to freeze-thaw treatment and dynamic loading

Experimental investigation on microstructure characteristics and deformation failure behaviors of sandstone after high temperature under Brazilian splitting

Experimental study on response characteristics of micro–macroscopic performance of red sandstone after high-temperature treatment

Experiment study of physical and mechanical properties of sandstone after variable thermal cycles

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Damage deterioration mechanism and damage constitutive modelling of red sandstone under cyclic thermal-cooling treatments

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

Experimental Investigation on Dynamic Mechanical Behavior and Fracture Evolution of Fissure-Filled Red Sandstone after Thermal Treatment

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

Dynamic tensile mechanical properties of water-saturated and frozen sandstone after freeze-thaw fatigue damage treatment