Abstract:1.1 Research background Interest in the Tm3+-doped fiber laser originates from its emission band in the range of 14002700nm lying between the bands of Er3+ and Nd3+ ions. Since the advent of double-cladding configuration of fiber and the recent technological development of high-power laser diodes, output power (performance) of Tm3+-doped fiber lasers has scaled exponentially. Up to date, the maximum output achieved in Tm3+-doped fiber lasers has been comparable with that from Yb3+-doped fiber lasers. Laser beam in the 2~3┤m wavelength range has wide applications. First, it is a good candidate in laser microsurgery due to high absorption of water in this spectral region thus can provide high-quality laser tissue cutting and welding. In addition, this wavelength-range laser has potential applications in environment monitoring, LIDAR, optical-parametric-oscillation (OPO) pump sources, and so on [1-4]. For obtaining laser emission in the mid-infrared wavelength region, the Tm3+-doped fiber is an excellent candidate due to several unique advantages it possesses. First, the Tm3+-doped fiber has a strong absorption spectrum that has good overlap with the emission band of commercially available AlGaAs laser diodes, which have been significantly developed and are being developed with an unprecedented speed. Second, the specific energy-level structure of Tm3+ ions provides the Tm3+-doped fiber laser a special advantageous energytransfer process-the 3H4+3H6→3F4+3F4 cross relaxation process. In this process, two excitedstate ions can be obtained with depletion of just one absorbed pump photon. With an appropriately high doping level, the cross relaxation process can offer a quantum efficiency close to two, which greatly improves the efficiency of the Tm3+-doped fiber laser. Thirdly, the Tm3+-doped fiber has a very broad emission band, spanning over more than 400 nm. This feature offers the Tm3+-doped fiber laser an especially high-degree wavelength tunability, which is very useful in applications such as spectroscopy, atmospheric sensing and so on.

Extending the wavelength tunability from 2.01 to 2.1 mu m and simultaneous dual-wavelength operation at 2.05 and 2.3 mu m in diode-pumped Tm: YLF lasers

2.3–2.5 μm laser operation of LD-pumped Tm:YAP on the 3H4→3H5 transition

Tm:YLF laser at 1.9 μm double-end pumped by laser diode

High-energy, high-peak-power diode-pumped Q-switched Tm:YAG laser at 2.02 μm with tunable repetition rate from 100 Hz to 1000 Hz

12.3-W output power and 271-nm wavelength tunability of diode-double-end-pumped Tm:CALYO laser

Diode-Pumped High Efficient Tm : Ylf Laser Output At 1908 Nm With Near-Diffraction Limited Beam Quality

A compact high efficient diode-double-passing-pumped mid-IR Tm:YLF laser at room temperature

High Power Tunable Tm-fiber Lasers and Its Application in Pumping Cr:ZnSe Lasers

High-power Gain-Switched Tm^3+-doped Fiber Laser

Continuous-wave and mode-locking operation of Tm:YAP lasers near 1.8 μm

Highly Efficient 2 Μm Tm:YAG Ceramic Laser.

Stable Wavelength, Narrow Linewidth Diode-Pumped Tm:Ylf Laser with Double Etalons

A Theoretical and Experimental Investigation for Wavelength Switchable TmYAG Laser Modulated by Tm:YAG Crystal Length

Tunable CW Tm,Ho:YLF laser at 2μm

High Efficient CW Tm, Ho: YLF Laser Pumped by Fiber-Coupled Diodes

Diode-pumped mid-infrared Tm:YGG laser at 2.0 and 2.3 μm

High-power Single-Longitudinal-mode Operation of Tm:YAG Laser Using Fabry–Perot Etalons and Volume Bragg Grating

High Power Tm:YLF Laser Operating at 1.94 Μm

Room-temperature cw and pulsed operation of a diode-end-pumped Tm:YAP laser

Short Tm3+-doped Fiber Lasers with Watt-Level Output Near 2 Μm

A Single Longitudinal Mode Tm, Ho:YLF Laser with a Continuously Tunable Frequency of 2.1 GHz with Double F–P Etalons