Abstract:Fiber lasers, owing to the high beam quality and super robustness, are widely used in fields from optical communications, fiber sensing, biomedicine to material processing. The use of glass fibers as the gain medium has, however, posed a strong obstacle for improving efficiency and, especially, achieving efficient lasing action in the mid-infrared (MIR) region, because of the relatively large nonradiative energy loss. Here, the fabrication of a Tm3+-doped tellurate glass-ceramic (GC) fiber is demonstrated, which enables enhanced lasing action at approximate to 2 mu m. Compared with the as-prepared fiber, the optical conversion efficiency of GC fiber is increased from 8.8% to 14.1%. The microstructure and spectral characterization analyses suggest that the improvement of the laser performance in GC fiber is induced by the significant change of the local environment surrounding Tm3+ ions due to the formation of nanocrystals within the glass fibers. Moreover, the developed GC fiber also enables Q-switched pulsed laser output at approximate to 2 mu m with a pulse energy of 3.2 J and pulse width of 4.1 ns. The results demonstrated here may have strong implications in the development of MIR fiber lasers and the applications of GC fibers in MIR photonics.

Short Tm3+-doped Fiber Lasers with Watt-Level Output Near 2 Μm

Single-frequency narrow-linewidth Tm-doped fiber laser using silicate glass fiber

Narrow Linewidth Tm3+-Doped Large Core Fiber Laser Based on A Femtosecond Written Fiber Bragg Grating

3 W Narrow-Linewidth Ultra-Short Wavelength Operation Near 1707 Nm in Thulium-Doped Silica Fiber Laser with Bidirectional Pumping

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Power-scalable sub-100-fs Tm laser at 2.08 μm

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Watts-Level Super-Compact Narrow-Linewidth Tm-Doped Silica All-Fiber Laser Near 1707 Nm with Fiber Bragg Gratings

High-Powered Millijoule Pulse Energy Tm3+-Doped Fiber Amplifier at 2.05 Mu M

227-W output all-fiberized Tm-doped fiber laser at 1908 nm

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

400 mW narrow-linewidth Tm-doped silica fiber laser output near 1750nm with volume Bragg grating

Highly Efficient 2 Μm Tm:YAG Ceramic Laser.

Ultra-short Wavelength Operation in Thulium-doped Silica Fiber Laser with Bidirectional Pumping

Tm-Doped Fiber Lasers: Fundamentals and Power Scaling

High-power Diode-Side-pumped Rod Tm:YAG Laser at 2.07 Μm.

Enhanced CW Lasing and Q‐Switched Pulse Generation Enabled by Tm3+‐Doped Glass Ceramic Fibers

Tm/Al Co-Doped Silica Glass Prepared by Laser Additive Manufacturing Technology for 2-Μm Photonic Crystal Fiber Laser

High-energy, high-peak-power diode-pumped Q-switched Tm:YAG laser at 2.02 μm with tunable repetition rate from 100 Hz to 1000 Hz

Widely-tunable All-Fiber Tm Doped MOPA with >1 Kw of Output Power