Preliminary analysis of maximum hypothetical accident for a solid core space nuclear reactor power system
Ge Li,Li Huaqi,Shan Jianqiang,Jiang Xinbiao
DOI: https://doi.org/10.1016/j.anucene.2023.110250
IF: 1.9
2023-12-01
Annals of Nuclear Energy
Abstract:In order to study the safety characteristics of the solid core space nuclear reactor power (SNRP) system under the maximum hypothetical accident, a two-dimensional entire core transient heat transfer analysis model was established, and the key parameters response characteristics of the ultra-small lithium-cooled SNRP under two maximum hypothetical accidents, namely, loss of heat sink (LOHS) and loss of coolant accident (LOCA), were calculated and analyzed. In the maximum hypothetical accidents, the coolant cooling capacity is lost, thus the core decay power is discharged into space only through the radiation of the residual heat removal system and the side surface of the reactor vessel. During the accidents, the heat transfer of the core deteriorated, and the fuel temperature may rise to the melting point, resulting in radioactive leakage. The results show that: (1) In the LOHS accident, the maximum fuel temperature reaches 2150 K at 550 s, and the pressure of the primary system volume accumulator continues to increase to the set system pressure safety limit of 2 MPa, resulting the primary loop overpressure failure. And the fuel matrix temperature is close to the set cladding limit temperature of 2200 K; (2) In the LOCA, the deterioration of heat transfer in the core makes the temperature increase rapidly, reaching a maximum of 3016 K at about 630 s, which is very close to the melting temperature of UN fuel 3123 K. As the decay power decreases, the maximum core temperature decreases to less than 1600 K after 24 h of the accident. The auxiliary cooling system of the solid core SNRP system under the maximum hypothetical accident is optimized, and the design parameters of the auxiliary cooling system meeting the safety requirements are obtained.
nuclear science & technology