Abstract:The multistep solvent extraction is an effective way for evaluating the original structure of coal, however, it is seldom used for studying the Hg distribution in coal and its release behavior during mild pyrolysis process. In this work, the Guizhou bituminous coal was divided into organic-rich class C1 and minerals-rich class C2, the C1 was further subdivided into 4 groups (EG1–EG4) using multistep solvent extraction method. The Hg species in different samples and their fate during pyrolysis was investigated using sequential chemical leaching methods and temperature-programmed experiments. The results showed the dominant Hg forms in different samples are quite different, the HCl-soluble and HNO3-soluble Hg are the dominant forms in C2, while organic matrix combined Hg is the most abundant form in C1, EG1 and EG2 samples. The Hg contents in EG1 to EG4 groups are in the order of EG4 < EG3 < EG2 < EG1, and have little correlation with the total sulfur contents. The thermal stability of different Hg species are quite distinct, the Hg in EG1 sample is the most thermal unstable and almost released completely before 400 °C. The Hg release of GZB, C1, and C2 are similar, >60% and 95% of Hg in the three samples can be released at 400 °C and 600 °C, respectively. The Hg-OM+ combined with aromatic clusters in EG2 is difficult to decompose during pyrolysis process, it mainly released in the temperature range of 400–800 °C. Except the Hg-OM+ combined with aromatic clusters in EG2, >95% of Hg can be released before 600 °C for other samples. When the heating rate increased from 5 °C/min to 20 °C/min, the Hg releasing peaks ranged from 150 to 400 °C shifted gradually to higher temperature zones, but there was no obvious change in the positions of peaks ranged from 400 to 800 °C.

Critical Temperature for Rapid Release of Mercury from Coal after High Temperature: A Review

Review of Elemental Mercury (hg0) Removal by CuO-based Materials

Releasing Behavior of Mercury in Coal During Mild Thermal Treatment

Thermal Effects from the Release of Selenium from a Coal Combustion During High-Temperature Processing: a Review

Hg occurrence in coal and its removal before coal utilization

Investigation into mercury transformation mechanisms in laboratory combustion systems

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

A Study On The Occurrence And Pre-Combustion Removal Of Mercury By Mild Thermal Upgrading In Two Chinese Coals

Study on Mercury Species in Coal and Pyrolysis-Based Mercury Removal before Utilization

A Review of Mercury Speciation and Control for Coal-fired Power Plants

Study of Mercury Emission During Coal Combustion

Emission control of mercury and sulfur by mild thermal upgrading of coal

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Release characteristics of mercury in chemical looping combustion of bituminous coal

Effect of Various Flue Gas Compositions on Mercury Speciation Transformation During Coal Combustion

Effect of Flue-gas Cleaning Devices on Mercury Emission From Coal-fired Boiler

Impact of Flue Gas Species and Temperature on Mercury Oxidation

A Review on Mercury Removal in Chemical Looping Combustion of Coal

Mercury Distribution in Guizhou Bituminous Coal and Its Releasing Behavior During Mild Pyrolysis Process

Characteristics of Speciated Mercury Emissions from Coal Combustion in Air and Oxygen-Enriched Environment