Abstract:The cross-shaped stiffened concrete-filled steel tubular stub column is constructed by incorporating steel reinforcement ribs into the traditional cross-shaped design, which helps delay the buckling of the steel tube and enhances its restraining effect on the concrete. However, existing standards and research proposed design methods for estimating the post-fire bearing capacity of steel reinforced concrete stub columns are primarily applicable to the ordinary steel tubes with conventional thickness and sections. Therefore, it is necessary to investigate the axial compressive properties of high-strength concrete stub columns with irregular thin-walled steel tubes after exposure to fire, which can contribute to their potential future application. Effects of various experimental parameters, such as heating time, width-thickness ratio, and longitudinal spacing of stiffeners were investigated. In total one specimen subjected to ambient temperature and eight cross-shaped stiffened concrete-filled steel tubular stub columns subjected to fire conditions were prepared for measuring temperature-time curves of specimens during ISO-834 standard fire, load-displacement curves, load-transverse, and longitudinal strain curves of specimens under axial compression loading. The failure modes of the specimens were recorded, and the influence of each parameter on the post-fire mechanical properties of the specimens was analyzed based on the experimental results. ABAQUS software was utilized to develop a model for post-fire analysis, which was validated by comparing it with experimental data. After validation, the model was used to analyze the underlying mechanism, and a comprehensive parametric study of members was conducted. Based on the results of the parametric study and the model developed for calculating bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column at ambient temperature, a simplified equation accounting for the effects of elevated temperature was proposed to predict the residual bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column after fire exposure. The average error between the simplified formula and the finite element simulation results is 0.925, and the mean square error is 0.085.

Experimental Study on Temperature Field of Concrete Member Due to Fire Exposure on One-Side

Experimental study on dynamic behavior of concrete at elevated temperatures

Tests on impact behaviour of concrete-filled steel tube after exposure to high temperatures

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

Experimental research on impact-resistant capacity of concrete filled steel tube under high temperature

Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Natural Thermometers in Concrete: Stability and Reliability Verification of Inclusion Decrepitation Thermoacoustic Thermometry

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Performance of Concrete Structure after Fire Disaster Based on Thermal Stress Coupling Field Analysis

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

Determining the fire-damage temperature of concrete by inclusion decrepitation

Experimental Study on the Mechanical Properties of Reinforced Concrete Columns after Exposure to Fire

Experimental Research and ANSYS Analysis of Temperature Field of Concrete Specimens Reinforced by Paste Method in the Fire

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Experimental assessment of explosive spalling in normal weight concrete panels under high intensity thermal exposure

Tests and Analysis on the Temperature Field Within Concrete Filled Steel Tubes with or Without Protection Subjected to a Standard Fire

A Fire Test on Continuous Reinforced Concrete Slabs in a Full-Scale Multi-Story Steel-Framed Building

Experimental investigation of concrete-filled square hollow section columns subjected to non-uniform exposure

Experimental and Numerical Study of Temperature Developments of Composite Joints Between Concrete-Encased Concrete-Filled Steel Tube Columns and Reinforced Concrete Beams

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures